Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0265
Holden Commodore VY VZ V8 AWD Wagon 2.5in Dual With Extractors Muffler
Holden Commodore VY VZ V8 AWD Wagon 2.5in Dual With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4932.37 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0265
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
All-wheel drive is what sets the MPI Automotive SSMKHN0265 apart: it's a 2.5in dual extractor-and-exhaust package listed to fit the VY-VZ V8 AWD Commodore in wagon body. The transfer case and front driveshaft on an AWD wagon take up room a rear-drive car leaves clear, so this kit is plumbed around that driveline rather than the standard two-wheel-drive layout.
Why does AWD change the exhaust?
On a VY-VZ AWD wagon there's a transfer case and a front propshaft running forward from the gearbox, plus the AWD crossmember, all sitting in space a rear-drive Commodore keeps open for pipework. A system that bolts straight onto a two-wheel-drive car will foul those parts, so the SSMKHN0265 is listed specifically for the AWD driveline — the clearances are designed in, not worked around on the hoist.
What does the package include?
It's a complete extractor-back system. Tube-and-merge extractors replace the cast factory manifolds at the heads — the main breathing restriction on these V8s — then the system continues as a matched 2.5in dual and finishes through a rear muffler each side. So you're changing the exhaust from the engine all the way back, not just swapping a tailpipe.
What's the 2.5in dual character?
A 2.5in dual keeps gas speed up across the two banks for low-down and mid-range response while flowing more than the factory plumbing, which suits a heavier AWD wagon that's asked to do everyday driving. The muffler-each-side arrangement aims for a fuller note rather than the louder, less-damped result of a hotdog, so it stays civil for a family-capable car.
What does fitting an AWD wagon involve here?
Oak Flats Muffler Men fits MPI extractor systems in-house across the Illawarra. Because the SSMKHN0265 is an AWD-specific, major-spend item, we confirm your VY or VZ series, the AWD driveline and the rear hanger arrangement before ordering — getting the right system first time matters more on a car where the wrong one simply won't clear the front driveshaft. Send your build and we'll book it in.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will this fit a rear-wheel-drive Commodore wagon?
- The SSMKHN0265 is listed for the AWD VY-VZ wagon and is routed around the AWD driveline. For a rear-drive car you'd want the two-wheel-drive listing — confirm with the workshop.
- Does it replace the factory manifolds too?
- Yes. It's a full extractor-back package, so the cast manifolds come off and tube extractors go on, along with the 2.5in dual system and rear mufflers.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.