Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0269
Holden Commodore VT - VZ V8 Wagon 2.5in Dual With Extractors Muffler
Holden Commodore VT - VZ V8 Wagon 2.5in Dual With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4786.40 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0269
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Built around the long-roof Commodore, the MPI Automotive SSMKHN0269 is a 2.5in dual extractor-and-exhaust package listed to fit the VT-VZ V8 in wagon body. The wagon's extended floorpan and rear overhang change how a dual system has to route, and this kit is specified for that shape rather than the sedan or ute.
Why a wagon-specific package?
A VT-VZ wagon carries a longer rear section and a different tailgate area than the sedan it shares a front end with, so the dual pipework, hangers and rear muffler placement all have to suit the estate floorpan. The SSMKHN0269 is listed against the wagon for exactly that reason — it's the same V8 up front, but the routing behind the diff is its own problem to solve.
What's in the system?
This is a full extractor-back package, not just a header set: tube-and-merge extractors replace the restrictive cast manifolds at the heads, then the system runs as a 2.5in dual the length of the car and finishes through a rear muffler each side. Replacing the cast manifolds is where most of the breathing gain on these V8s comes from, and the matched 2.5in dual keeps the flow consistent rather than necking down to a factory bottleneck.
What does the 2.5in dual suit?
A 2.5in dual is the street-oriented sizing for these Holden V8s — paired pipes keep gas speed up for low-down and mid-range response while still flowing more than the standard single-bank plumbing. With a muffler each side rather than a hotdog, the SSMKHN0269 is pitched at a fuller note without crossing into raucous, which suits a wagon that still does family-car duty.
How is fitment confirmed at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits MPI extractor systems in-house across the Illawarra. The SSMKHN0269 is listed to fit the VT-VZ V8 wagon; because it's a major-spend item we check your exact series, manifold type and rear hanger arrangement before ordering so the system that arrives is the one your car actually takes. Send your build and we'll book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the SSMKHN0269 just the extractors or the whole system?
- It's a complete extractor-back package — extractors at the heads plus the 2.5in dual exhaust and rear mufflers, not headers on their own.
- Will it fit my VT-VZ Commodore wagon?
- It's listed to fit the VT-VZ V8 in wagon body. The wagon routing differs from the sedan, so confirm your exact series with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.