Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0281
Holden VP VR VS Statesman V8 IRS Auto 3in With Extractors Muffler
Holden VP VR VS Statesman V8 IRS Auto 3in With Extractors Muffler (SSMKHN0281) Fits HOLDEN. Fast.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $3307.70 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0281
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive SSMKHN0281 is the 3in option for the Holden VP/VR/VS Statesman V8, built for the IRS automatic combination and finished with a muffler. The bigger 3in bore is the headline — an open-flowing run paired specifically to the independent rear and the auto driveline.
What does the 3in bore suit?
A 3in system gives the Statesman V8 plenty of room to breathe, which suits a car that's been worked or driven harder up top. A larger bore trades some low-rpm gas velocity for a clearer high-rpm path — an application choice rather than an automatic gain. We publish no flow or power figures and won't quote any.
Why the IRS-and-auto-specific build?
This listing pairs two fitment constraints: the independent rear suspension at the back and the automatic transmission up front. The SSMKHN0281 is bent to clear both, so it threads the IRS cradle and the auto crossmember cleanly. Confirm your rear end and gearbox with the workshop before ordering — both decide whether the run sits.
How is the 3in run silenced?
A muffler in the 3in run keeps the bigger-bore note in check, so the system stays road-liveable rather than raucous. Tube extractors at the head start the run, replacing the restrictive factory cast manifolds — the main breathing limit on these V8s — so the gas leaves the cylinders more cleanly before the 3in pipe carries it back.
How does fitment work in the Illawarra?
Oak Flats Muffler Men supplies and fits this head-back package in-house across the Illawarra. It's listed to fit the VP/VR/VS Statesman V8 with IRS and auto; bring the car so we can confirm both the rear end and the gearbox before booking the bay.
How is it supplied?
This is an application-specific MPI Automotive package ordered against your confirmed VP/VR/VS Statesman IRS auto, not a shelf system. At an RRP of $3,307.70 the step up to 3in is a deliberate spec call, so we confirm both the rear end and gearbox match the listing before committing the order.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Why pick the 3in version?
- The 3in bore is the open-flowing VP/VR/VS Statesman option here, suiting a worked or harder-driven V8 over a stock cruiser.
- What driveline does it suit?
- The independent-rear-suspension automatic VP/VR/VS Statesman V8. Confirm your rear end and gearbox with the workshop.
- Do you fit it?
- Yes — Oak Flats Muffler Men fits these in-house across the Illawarra once your build is confirmed.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.