Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0286SC
Holden VP VR VS Statesman V8 IRS Auto 2.5in With Extractors Tailpipe
Holden VP VR VS Statesman V8 IRS Auto 2.5in With Extractors Tailpipe.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $3630.80 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0286SC
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Cut for the IRS-equipped automatic Statesman, the MPI Automotive SSMKHN0286SC is a 2.5in extractor system listed to fit the Holden VP, VR and VS Statesman V8 (IRS auto). The independent rear end and auto drivetrain set the routing; the 2.5in system finishes through a tailpipe.
Why does the IRS auto fitment matter?
This part is listed specifically for the IRS (independent rear suspension) automatic Statesman, so the rear-end and transmission combination is part of the fitment. An IRS rear changes the clearance the back of the system has to work around, and the auto sets crossmember packaging up front. Get either wrong and the run may not sit, which is why the listing names the IRS auto directly.
What does the 2.5in tailpipe layout cover?
At 2.5in the system runs a narrower pipe that keeps gas speed up for street response. The extractors replace the factory cast manifolds with mandrel-bent tube-and-merge runners, and the system finishes with a tailpipe — a single-stage exit rather than a hotdog-and-muffler arrangement.
Will it suit my VP, VR or VS Statesman?
It's listed to fit the Holden VP, VR and VS Statesman V8 with IRS and an automatic. These series differ in detail, so confirm your exact car, rear end and transmission with us against the listing before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits VP/VR/VS Statesman systems in the Illawarra. We check the extractor flanges to your heads, confirm the 2.5in run clears the IRS rear and auto crossmember, and seal the joints for heat cycling. RRP is listed at 3630.80 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the SSMKHN0286SC only for the IRS auto Statesman?
- It's listed to fit the Holden VP/VR/VS Statesman V8 with IRS and an automatic. Confirm your exact rear end and transmission with the workshop before ordering.
- Does it run a muffler?
- It runs 2.5in extractors into a system finishing with a tailpipe — a single-stage exit rather than a hotdog-and-muffler layout.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.