Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0327
Holden Commodore VF V8 Sedan Wagon 2.5in With Extractors Muffler
Holden Commodore VF V8 Sedan Wagon 2.5in With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5663.75 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0327
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive SSMKHN0327 is the road-focused 2.5in extractor system for the Holden Commodore VF V8, listed across sedan and wagon, finished muffler-to-muffler. The 2.5in bore holds gas speed up for street response and the twin-muffler exit keeps the note reserved.
What does the 2.5in sizing suit?
System diameter is an application choice. At 2.5in this VF build keeps gas speed up, which favours low-down and mid-range response on a street-driven car. It's the keener-sized, road-focused VF option, matched front to rear so the extractors and pipework flow as one. We publish no flow or power figures and won't quote any.
Why the twin-muffler exit?
The SSMKHN0327 finishes muffler-to-muffler rather than with a hotdog resonator. Two muffler stages take the note down in two passes, so on the 2.5in system it's a notably reserved build — the V8 present without carrying into the cabin. No sound figure is published; this is a relative description, not a measured one.
Will it suit my VF Commodore?
It's listed to fit the Holden Commodore VF V8 in sedan and wagon. The two bodies route differently at the rear — the wagon's longer floorpan shifts hanger and muffler placement — so the 2.5in run is shaped to suit each. Confirm your exact body and build with us against the listing before ordering; body and bore are the key checks here.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits VF extractor systems in-house across the Illawarra. We check the extractor flanges to your heads, confirm the 2.5in run clears the floor and rear end, hang both mufflers and seal the joints for heat cycling. RRP is listed at 5663.75 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the SSMKHN0327 fit my VF Commodore V8?
- It's listed to fit the Holden Commodore VF V8 in sedan and wagon. Confirm your exact body and build with the workshop before ordering.
- Is it a reserved system?
- It runs two mufflers in series, so it's a reserved VF sedan/wagon build. We don't publish a sound level.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.