Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0331
VF HSV V8 Sedan Wagon 3in With 1 7/8 in Extractors Muffler
VF HSV V8 Sedan Wagon 3in With 1 7/8 in Extractors Muffler/Muffler (SSMKHN0331) Fits HOLDEN. Fast.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5938.34 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0331
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Pairing the larger 1⅞in primaries with a twin-muffler exit, the MPI Automotive SSMKHN0331 is listed to fit the VF HSV V8 sedan and wagon. The 1⅞in primary tubing suits the higher-output, higher-rpm end of the HSV range, run on a 3in system that finishes muffler-to-muffler.
What does the 1⅞in primary size suit?
At 1⅞in, these extractors run a larger primary than the 1¾in street builds. A larger primary cross-section suits higher-rpm, higher-output engines — the matching sizing for a worked HSV V8 — rather than the low-down gas-speed bias of a narrower tube. It's general engine theory, with no flow or power figures published or quoted.
Why twin mufflers on the HSV sedan/wagon?
The SSMKHN0331 finishes muffler-to-muffler rather than with a hotdog resonator and a single muffler. Two muffler stages take the note down in two passes, so even on the larger 1⅞in extractors it's the more reserved exit. We publish no sound figure and won't quote one; the twin-muffler layout keeps the cabin settled.
Will it suit my VF HSV sedan or wagon?
It's listed to fit the VF HSV V8 in sedan and wagon. HSV variants differ across the range, so confirm your exact car with us against the listing before ordering. The body style sets the rear routing — this is the sedan/wagon build, not the ute.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits VF HSV systems in the Illawarra. We check the 1⅞in extractor flanges to your heads, route the 3in run, hang both mufflers with proper clearance, and seal the joints for heat cycling. RRP is listed at 5938.34 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What's the benefit of the 1⅞in primaries on the SSMKHN0331?
- The larger 1⅞in primary suits higher-rpm, higher-output HSV V8 builds. It's an application choice rather than a power claim.
- Is this the quieter HSV exit?
- It runs two mufflers in series rather than a hotdog and one muffler, so it's the more reserved VF HSV sedan/wagon build. We don't publish a sound level.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.