Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0336
VF HSV Ute Maloo V8 3in With 1 7/8 in Extractors Hotdog/Muffler
VF HSV Ute Maloo V8 3in With 1 7/8 in Extractors Hotdog/Muffler (SSMKHN0336) Fits HOLDEN. Fast.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5656.16 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0336
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Stepping up to 1⅞in primaries, the MPI Automotive SSMKHN0336 is the larger-bore extractor system listed to fit the VF HSV Ute (Maloo) V8. The 1⅞in primary tubing suits the higher-output, higher-rpm end of the V8 range, run on a 3in system with a hotdog resonator and muffler for the Maloo ute.
What does 1⅞in primary tubing suit?
Primary bore is an application choice. At 1⅞in these extractors run a larger primary than the 1¾in street builds — larger primaries suit higher-rpm, higher-output engines, where the extra cross-section helps the top end rather than holding gas speed up low down. On a worked Maloo V8 that's the matching sizing. It's general engine theory; we publish no flow or power figures and won't quote any.
What's the HSV Maloo ute fitment?
This system is listed for the VF HSV Ute in Maloo form, so it's cut for the HSV ute layout rather than a base Commodore. The ute carries its exhaust under a tray, which sets the rear routing, and the HSV front end sets the extractor packaging. The 3in system runs a hotdog resonator into the muffler.
Will it suit my VF HSV Maloo?
It's listed to fit the VF HSV Ute (Maloo) V8. HSV utes differ in detail, so confirm your exact car with us against the listing before ordering. We check the ute rather than rely on feed data alone.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits VF HSV ute systems in the Illawarra. We check the 1⅞in extractor flanges to your heads, route the 3in run and hotdog under the tray with proper clearance, and seal the joints for heat cycling. RRP is listed at 5656.16 AUD; fitting is quoted once we've seen the ute.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Why does the SSMKHN0336 use 1⅞in primaries?
- The larger 1⅞in primary suits higher-rpm, higher-output builds. It's an application choice for a worked Maloo V8, not a power claim.
- Is it specific to the HSV Maloo?
- It's listed to fit the VF HSV Ute (Maloo) V8, supplied by MPI Automotive. Confirm your exact car with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.