Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0340
Holden Commodore VF Ute 2.5in With Extractors Muffler
MPI Automotive Holden Commodore VF Ute 2.5in With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5694.12 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0340
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Twin-muffler for a settled note, the MPI Automotive SSMKHN0340 is a 2.5in extractor system run muffler-to-muffler, listed to fit the Holden Commodore VF ute. It's listed at $5,694.12.
Why muffler-to-muffler on the VF ute?
The SSMKHN0340 runs muffler-to-muffler — two muffler stages on the 2.5in run rather than a single silencer or none. That gives the most silencing of the configurations here, which suits a VF ute used as a daily and a load-hauler where you want the V8 present but the cabin liveable on a long drive. The twin-muffler layout is the defining feature of this build.
What does the 2.5in extractor system cover?
This is an extractor change with a matched 2.5in pipe through to two mufflers. The extractors replace the factory cast manifolds with tube-and-merge runners, freeing the exhaust path off the head, and the 2.5in pipework carries the gas back. The two muffler stages then settle the note before it exits.
Who should choose the quieter build?
The muffler-to-muffler version is for the owner who wants the extractor benefit without a loud result — someone driving the VF ute every day, towing, or who just prefers a controlled note. It's the opposite end of the range from a no-muffler build, trading some volume for a far more civil result. Pick it if cabin comfort matters as much as the upgrade.
Is it road legal, and how do we fit it?
As an extractor change this alters the exhaust at the head, so road compliance depends on the full build and your state's rules — we'll confirm that with you rather than assume it. Oak Flats Muffler Men fits Commodore systems like this across the Illawarra; it's listed to fit the VF ute, so send your build and we'll confirm clearances and the muffler routing before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- How is the SSMKHN0340 silenced?
- Muffler-to-muffler — two muffler stages — making it the more-silenced 2.5in build for the VF ute.
- Which Commodore does it fit?
- It's listed to fit the Holden Commodore VF ute. Confirm your exact build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.