Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0344
Holden Commodore VF Ute V8 3in With 1 7/8 in Extractors Hotdog/Muffler
Holden Commodore VF Ute V8 3in With 1 7/8 in Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5737.20 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0344
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
A hotdog resonator running into a rear muffler defines the MPI Automotive SSMKHN0344 — a 3in extractor-back package with 1-7/8in primaries, listed to fit the Holden Commodore VF V8 ute. The straight-through hotdog ahead of the muffler gives the ute a freer rear note on the big-bore pipework.
What does the hotdog-and-muffler rear do?
A hotdog is a small straight-through resonator fitted in line ahead of the rear muffler. It trims particular resonances before the muffler handles the main silencing, so the SSMKHN0344 opens the note a touch more than a fully damped tail while staying liveable on the road. On the 3in pipework that freer rear is what sets this ute build's voice. No sound figure is published; this is a relative description, not a measured one.
Why 1-7/8in primaries here?
The 1-7/8in extractors are the larger primary this listing specifies. They sit at the very front, replacing the cast factory manifolds and setting the path the 3in pipework follows. Bigger primaries lean toward higher-rpm breathing on the V8, with the hotdog and muffler downstream shaping what reaches the tailpipe. Material is not published by the supplier in this record, so we don't state one.
Will it suit my VF Commodore ute?
It's listed to fit the Holden Commodore VF V8 ute. Because the VF ran across several variants, confirm your exact build with the workshop before ordering — feed data can be imperfect, and the car on the hoist is the final word on clearances and hanger points. The ute's tray and rear floor route the back of the system its own way, so we check that against your vehicle.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor systems like this in-house across the Illawarra. We set the 1-7/8in extractor clearances at the heads, hang the 3in pipework, fit the hotdog and rear muffler, then confirm the VF ute build against the listing. At an RRP of $5,737.20 it can be a special-order item, so ask about lead time when you book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the SSMKHN0344 fit my VF Commodore ute?
- It's listed to fit the Holden Commodore VF V8 ute. Confirm your exact build with the workshop before ordering, as variants differ in detail.
- What's the rear configuration?
- A straight-through hotdog resonator into a rear muffler, on 1-7/8in extractors and 3in pipework — freer than a fully damped tail, but still silenced.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.