Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0384
Holden Commodore VN VP VR VS Sedan 5.0L Auto V8 3in With Extractors Tailpipe
Holden Commodore VN VP VR VS Sedan 5.0L Auto V8 3in With Extractors Tailpipe.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $2989.94 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0384
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive SSMKHN0384 is a 3in extractor system listed to fit the Holden Commodore VN, VP, VR and VS sedan with the 5.0L auto V8, finishing through a tailpipe. At $2,989.94 RRP it replaces the run from the manifolds rearward, so the whole exhaust path is sized together rather than swapped piecemeal.
Why a 3in bore on the 5.0L V8?
The headline number on the SSMKHN0384 is its 3in pipework. A 3in bore behind the extractors gives the 5.0L V8 a generous, consistent path from the merge collectors to the tailpipe, so the system isn't pinching back down to a tighter factory size partway along. That single bore through the run is what defines this listing for the VN to VS sedan; no muffler configuration or material is published by the supplier in this record, so we don't state them.
What does the extractor-back run replace?
This is an extractor-back package: tubular extractors at the front, 3in pipework through the middle, and a tailpipe at the rear, listed for the Commodore VN, VP, VR and VS sedan. Replacing from the manifolds rearward means the front of the system is set by tubular primaries rather than the cast factory manifolds, with the 3in path behind them following the line the extractors set. It's a fuller change than a tailpipe-only swap on these earlier Commodores.
Will it suit my VN-VS sedan?
It's listed to fit the Holden Commodore VN, VP, VR and VS sedan with the 5.0L auto V8. Because that spans four body codes built across several years, confirm your exact build — including the auto transmission — with the workshop before ordering. Feed data can be imperfect, so the car on the hoist is the final word on clearances for the 3in run.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor systems like this in-house across the Illawarra. We set the extractor clearances at the head, hang the 3in pipework, fit the tailpipe, then check the VN-VS sedan build against the listing. These earlier Commodore systems can be a special-order item, so ask about lead time when you book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the SSMKHN0384 fit my VN-VS Commodore sedan?
- It's listed to fit the Holden Commodore VN, VP, VR and VS sedan with the 5.0L auto V8. Confirm your exact build with the workshop before ordering.
- What pipe size is it?
- It's a 3in extractor-back system, with 3in pipework running from the extractors back to the tailpipe.
- Does this suit the auto only?
- It's listed for the 5.0L auto V8. Confirm your transmission with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.