Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0413
Holden Commodore VU VY VZ V8 Ute 3in Dual With 1 3/4 in Extractors Hotdog/Muffler
MPI Automotive Holden Commodore VU VY VZ V8 Ute 3in Dual With 1 3/4 in Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5308.61 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0413
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive SSMKHN0413 is the hotdog-resonator take on the dual 3in VU/VY/VZ ute system — two 3in pipes, one per bank, each carrying a hotdog and muffler. Listed to fit the Holden Commodore VU, VY and VZ V8 ute with 1¾in primaries, it sits between the open and the twin-muffler builds on note.
Where does the hotdog build sit?
This dual 3in ute system uses a hotdog resonator ahead of the muffler rather than running a single muffler-to-tailpipe or a full twin-muffler setup. The hotdog takes an early edge off the note in the mid-section, then the muffler finishes the job — a middle path between the more open and the quietest VU/VY/VZ ute options. No sound figure is published; we won't quote one.
What does dual 3in routing do here?
Dual means each cylinder bank runs its own 3in pipe to the rear rather than the banks collecting into one. On the VU/VY/VZ ute the tray sets that routing. The 1¾in primaries feed both banks, swapping the factory cast manifolds for mandrel-bent tube-and-merge runners, with the street-focused gas-speed character that bore gives.
Will it suit my VU, VY or VZ ute?
It's listed to fit the Holden Commodore VU, VY and VZ V8 ute. Confirm your exact series and build with us against the listing before ordering, since the shared platform still varies in detail across the three series.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits VU/VY/VZ ute systems in the Illawarra. We check the 1¾in extractor flanges to your heads, route both 3in pipes under the tray, hang the hotdog and muffler with proper clearance, and seal the joints for heat cycling. RRP is listed at 5308.61 AUD; fitting is quoted once we've seen the ute.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- How does the SSMKHN0413 differ from the twin-muffler ute version?
- It uses a hotdog resonator and a single muffler rather than two mufflers, so it sits between the open and the quietest dual 3in ute builds on note.
- Does each bank run its own pipe?
- Yes — dual 3in means separate pipes per cylinder bank the length of the ute.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.