Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0419
Holden WH Statesman V8 3in Dual With 1 3/4 in Extractors Hotdog/Muffler
Holden WH Statesman V8 3in Dual With 1 3/4 in Extractors Hotdog/Muffler (SSMKHN0419) Fits HOLDEN.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5362.76 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0419
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Twin 3in pipes the length of the car set the MPI Automotive SSMKHN0419 apart — a dual 3in extractor system listed to fit the Holden WH Statesman V8. With 1¾in primaries feeding both banks into separate 3in runs, it's built for the long-wheelbase Statesman, finishing through a hotdog resonator and muffler.
What does a dual 3in system mean here?
Dual means each cylinder bank gets its own 3in pipe rather than the banks collecting into a single run. On a long-wheelbase WH Statesman the dual layout suits the wider underbody, and it keeps the two banks separate from the extractors back. The 1¾in primaries feed each side, then the twin 3in runs carry a hotdog resonator and muffler.
Why 1¾in primaries on the Statesman V8?
The 1¾in primary size keeps exhaust-gas speed up, which favours the low-down and mid-range response a heavier long-wheelbase car uses most. The extractors swap the factory cast manifolds for mandrel-bent tube-and-merge runners. It's general engine theory — no flow or power numbers are published, and we won't quote any.
Will it suit my WH Statesman?
It's listed to fit the Holden WH Statesman V8. The long-wheelbase body and dual routing are the key checks, so confirm your exact car with us against the listing before ordering. Feed data is a starting point, not the final word.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits WH Statesman systems in the Illawarra. We check the 1¾in extractor flanges to your heads, route both 3in pipes the length of the car with proper clearance, and seal the joints for heat cycling. RRP is listed at 5362.76 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does dual 3in mean on the SSMKHN0419?
- Each cylinder bank runs its own 3in pipe the length of the car, rather than collecting into a single pipe. It suits the long-wheelbase WH Statesman body.
- What primaries does it use?
- It runs 1¾in extractor primaries, suited to low-down and mid-range response on the Statesman V8.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.