Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0427
HSV VE E3 Sedan Wagon 3in With 1 3/4 in Extractors Hotdog/Muffler
HSV VE E3 Sedan Wagon 3in With 1 3/4 in Extractors Hotdog/Muffler (SKU: SSMKHN0427) Engineered.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5587.10 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0427
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Matched to the VE E3-series car, the MPI Automotive SSMKHN0427 is a 3in system with 1¾in extractors and a hotdog muffler, listed to fit the HSV VE E3 sedan and wagon. It's listed at $5,587.10.
What's the VE E3 fitment about?
The SSMKHN0427 is cut for the HSV VE E3 sedan and wagon — the later E3 update of the VE-platform HSV. The system is routed for that car's sedan and wagon body, with its boot and rear-axle layout, so the fit is tied to that series. It's the 3in build with 1¾in extractors and a hotdog finish for the E3 car.
Why the hotdog muffler?
This version finishes through a hotdog muffler — a straight-through resonator-style silencer rather than a chambered box. It keeps the back end simpler and the note more open than a twin-muffler layout, which suits an owner who wants the E3 to sound present without going as quiet as a double-muffler build. It's the leaner-silencing finish on the 3in system.
What do the 1¾in extractors suit?
The extractors run 1¾in primary tubing — the smaller-primary option, which keeps gas speed up off the head and favours low-down and mid-range response on a street car. They replace the factory cast manifolds with tube-and-merge runners, the usual starting point for an HSV exhaust build.
Road compliance and fitting at our Illawarra workshop
Because this changes the exhaust at the head, road compliance depends on the full build and your state's requirements — we'll confirm that with you rather than have you assume it. Oak Flats Muffler Men fits HSV systems like this across the Illawarra; it's listed to fit the VE E3 sedan and wagon, so send your build and we'll confirm clearances and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which HSV does the SSMKHN0427 fit?
- It's listed to fit the HSV VE E3 sedan and wagon. Confirm your exact series and build with the workshop before ordering.
- What's the muffler and extractor spec?
- A hotdog muffler with 1¾in primary extractors, on a 3in system.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.