Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0435
Holden Commodore VF V8 Sedan Wagon 3in With 1 3/4 in Extractors Hotdog/Muffler
MPI Automotive Holden Commodore VF V8 Sedan Wagon 3in With 1 3/4 in Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5668.15 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0435
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Built around 1¾in primary tubing, the MPI Automotive SSMKHN0435 is a 3in extractor-and-exhaust package listed to fit the Holden Commodore VF V8 in sedan and wagon body styles. The 1¾in primaries keep exhaust-gas speed up for low-down and mid-range response on a street-driven LS, and the system runs a hotdog resonator into its muffler.
What does the 1¾in primary tubing suit?
Primary tube size is an application choice. At 1¾in the SSMKHN0435 sits at the street-engine end of the range — narrower primaries hold gas speed up, which favours throttle response and torque where a road-driven VF spends most of its time, rather than the top-end chase of a larger bore. The extractors replace the restrictive cast factory manifolds with mandrel-bent tube-and-merge runners, and the 3in system carries that into a hotdog resonator before the muffler.
Why the hotdog-and-muffler layout?
This build pairs a hotdog resonator with a rear muffler rather than running muffler-to-muffler. The hotdog takes an early edge off the note in the mid-section, then the rear muffler does the final quieting, so it leans calmer in the cabin than a straighter layout. We won't quote a sound level — there's no published figure — but it's the more reserved of the VF sedan/wagon options in this family.
Will it suit my VF Commodore?
It's listed to fit the Holden Commodore VF V8 in sedan and wagon form. Body style drives the rear routing and clearance, and this part is cut for the sedan/wagon floor rather than the ute tray. Send your exact VF build and we'll confirm the fitment against the listing before anything is ordered.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits VF extractor systems in-house across the Illawarra. We check the 1¾in extractor flanges against your heads, confirm the 3in run clears the floor and rear end, and seal the joints for heat cycling. RRP is listed at 5668.15 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the 1¾in primary size give me?
- Narrower 1¾in primaries keep exhaust-gas speed up, which suits low-down and mid-range response on a street-driven VF V8 rather than a high-rpm build. It's an application choice, not a power claim.
- Will the SSMKHN0435 fit a VF wagon as well as the sedan?
- It's listed to fit the Holden Commodore VF V8 in both sedan and wagon. Confirm your exact build with the workshop before ordering, as feed data can be imperfect.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.