Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0436
VF HSV V8 Sedan Wagon 3in With 1 3/4 in Extractors Muffler
VF HSV V8 Sedan Wagon 3in With 1 3/4 in Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5801.74 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0436
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Two muffler stages for the quietest version, the MPI Automotive SSMKHN0436 is a 3in muffler-to-muffler system with 1¾in extractors listed to fit the VF HSV V8 sedan and wagon. It's listed at $5,801.74.
Why the muffler-to-muffler layout?
The SSMKHN0436 is defined by its muffler-to-muffler arrangement — two muffler stages on the 3in run rather than a single resonator. That gives the most silencing in this package, which suits a VF HSV sedan or wagon driven daily, on the highway and through town. It's the build to choose when you want the V8 to make its presence known without dominating the cabin.
What does the sedan/wagon routing mean for fit?
This system is shaped for the VF HSV sedan and wagon body, with its boot and rear-axle layout, rather than the ute. The pipework has to follow that underfloor path, so the body match is part of the spec. It's listed to fit the V8 sedan and wagon at 3in.
What do the 1¾in extractors bring?
The extractors use 1¾in primary tubing — the smaller-primary option, which keeps gas speed up off the head and favours low-down and mid-range response for a street V8. They replace the factory cast manifolds with tube-and-merge runners, and the 3in pipe carries the gas back through the two mufflers.
Road compliance and fitting at our Illawarra workshop
Because it changes the exhaust at the head, road compliance comes down to the full build and your state's requirements — we'll confirm that with you rather than have you assume it from the listing. Oak Flats Muffler Men fits HSV systems like this across the Illawarra; tell us your exact build and we'll confirm clearances and the muffler routing before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the SSMKHN0436 the quieter option?
- It runs muffler-to-muffler — two muffler stages — so it's the more-silenced build in this package.
- Which body does it fit?
- It's listed to fit the VF HSV V8 sedan and wagon. Confirm your exact body and build with the workshop before ordering.
- What extractor size does it run?
- 1¾in primary tubing, which favours low and mid-range response on a street V8.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.