Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0437
VF HSV V8 Sedan Wagon 3in With 1 3/4 in Extractors Hotdog/Muffler
VF HSV V8 Sedan Wagon 3in With 1 3/4 in Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5587.10 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0437
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Routed for the sedan and wagon body, the MPI Automotive SSMKHN0437 is a 3in system with 1¾in extractors and a hotdog muffler, listed to fit the VF HSV V8 sedan and wagon. It's listed at $5,587.10.
What's specific to the sedan/wagon fitment?
The SSMKHN0437 is cut for the VF HSV sedan and wagon, not the ute. That body has its own underfloor routing — a boot and rear-axle layout the pipework has to follow — so the system is shaped for that shape. Matching the body is the point: a ute system won't sit the same under a sedan or wagon. This is the sedan/wagon-fit version at 3in with 1¾in extractors.
What does the 1¾in extractor size suit?
The extractors run 1¾in primary tubing, the smaller-primary choice. Smaller primaries keep gas speed up off the head, favouring low-down and mid-range response — where a street V8 sedan or wagon spends most of its time. The extractors replace the factory cast manifolds with tube-and-merge runners as the foundation of the build.
What does the hotdog muffler do here?
This version finishes through a hotdog muffler — a straight-through resonator-style silencer that keeps the back end simpler and the note a touch more open than a chambered, twin-muffler layout. On a VF HSV sedan or wagon it's the leaner-silencing finish for the 3in system.
Is it road legal, and how do we fit it?
As an extractor change this alters the exhaust at the head, so road compliance depends on the full build and your state's rules — we'll confirm that with you, not assume it. Oak Flats Muffler Men fits HSV systems like this across the Illawarra; it's listed to fit the VF HSV V8 sedan and wagon, so send your build and we'll confirm clearances and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the SSMKHN0437 fit a wagon as well as a sedan?
- It's listed to fit the VF HSV V8 sedan and wagon. Confirm your exact body and build with the workshop before ordering.
- What muffler and extractor size does it use?
- A hotdog muffler with 1¾in primary extractors, on a 3in system.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.