Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0451
Holden Commodore VE & VF 3.6L Ute 2.5in With Extractors Hotdog/Muffler
Holden Commodore VE & VF 3.6L Ute 2.5in With Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5063.64 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0451
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive SSMKHN0451 is a 2.5in extractor package with a hotdog and rear muffler, listed to fit the Holden Commodore VE and VF 3.6L ute. It changes the system from the heads back, not just the tailpipe.
What does this package cover?
This build pairs extractors with 2.5in pipework, a hotdog resonator and a rear muffler for the V6 ute. It's the whole run from the manifolds rearward, which is why it carries a complete-job RRP of $5,063.64 rather than a bolt-on price. MPI Automotive doesn't publish the pipe material or wall thickness in this listing, so we confirm those details at the workshop.
What are extractors and what do they change?
Extractors, or headers, swap the cast factory manifolds for tubular primaries so each cylinder gets a cleaner path to merge. On the 3.6L V6 the aim is smoother flow off the heads. Behind them the 2.5in pipework, hotdog resonator and rear muffler carry and settle that flow — the hotdog trims drone, the muffler sets the tone. It's louder than stock; how much depends on your build.
Will it suit my VE or VF Commodore 3.6L ute?
It's listed to fit the Holden Commodore VE and VF 3.6L ute. MPI lists the series and body type but not the model years in this record, so send your exact build — the workshop checks the manifold flanges, crossmember clearance and rear hangers before ordering. Listed to fit means we verify it against your car, not that it drops on unseen.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits extractor systems like this in-house across the Illawarra. We fit the extractors to the heads, route the 2.5in pipework, hang the hotdog and rear muffler, and check clearances through the underbody. At this RRP it's typically a special-order item, so we confirm availability and your fitment before committing the order.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the SSMKHN0451 fit my VE or VF Commodore ute?
- It's listed to fit the Holden Commodore VE and VF 3.6L ute. Confirm your exact variant and build with the workshop before we order it in.
- What's the difference between the hotdog and the rear muffler here?
- The hotdog is an inline resonator that helps trim drone; the rear muffler sets the overall tone. This SSMKHN0451 build runs both on 2.5in pipework.
- Is the pipe material listed?
- No — MPI doesn't publish the material or wall thickness for this listing. The workshop confirms those details when you order.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.