Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors
MPI AutomotiveRRP$5467.66MPI Automotive Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors, Cats and Catback with Single.
View partSSMKTY0073
Landcruiser FZJ80 4.5L, Mandrel Bent Extractors With Flex & 2.5in Full System
Landcruiser FZJ80 4.5L, Mandrel Bent Extractors With Flex & 2.5in Full System (SSMKTY0073) Fits TOYOTA.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $2443.42 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKTY0073
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Toyota
- Stock status
- In stock at supplier
The MPI Automotive SSMKTY0073 pairs mandrel-bent extractors with a flex joint and a 2.5in full exhaust system, listed to fit the Toyota Landcruiser FZJ80 4.5L. It's a matched package in one bore.
What does this package cover?
This is an extractors-and-full-system kit for the Toyota Landcruiser FZJ80 4.5L: mandrel-bent tubular extractors with a flex joint, feeding a 2.5in run through to the rear. Mandrel bends keep the pipe's diameter consistent through each curve rather than crimping it, and the flex joint absorbs engine and driveline movement. Supplied as one matched kit, the bore is sized to suit the runners.
What are extractors and what does the flex joint add?
Extractors (headers) replace the cast factory manifolds with tubular runners that scavenge each cylinder more cleanly than a casting. The flex joint here is a flexible section that lets the system move with the engine without cracking pipework — useful on a four-wheel-drive that sees rough ground. We won't put numbers on the result, as there's no flow or sound data recorded, but the honest set-up is mandrel-bent extractors, a flex joint and a 2.5in full system.
Will it suit my Landcruiser FZJ80?
It's listed to fit the Toyota Landcruiser FZJ80 4.5L. The record doesn't publish a year, so we won't state one. These wagons vary in prior repairs and existing pipework, so confirm your exact build with the workshop before ordering. We treat fitment as listed-to-fit, not a promise of exact fit.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits extractor-and-system packages like this in-house across the Illawarra. Because it touches the manifolds and includes a flex joint, we check gasket faces, the flex alignment, hanger points and clearances on the vehicle. At an RRP of 2443.42 AUD it's ordered to your build; send us your details and we'll confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What's special about the SSMKTY0073 extractors?
- They're mandrel-bent and come with a flex joint, supplied alongside a 2.5in full system for the FZJ80 4.5L Landcruiser.
- What does the flex joint do?
- It's a flexible section that lets the system move with the engine and driveline, which helps avoid cracked pipework on a four-wheel-drive.
- Will it fit my 4.5L FZJ80 Landcruiser?
- It's listed to fit the Toyota Landcruiser FZJ80 4.5L. Confirm your exact build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust
MPI AutomotiveRRP$5259.39Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust with Centre & Rear Muffler.
View part
Toyota UZJ100 LANDCRUISER 4.7L V8 EXTRACTORS, CATS & 3in EXHAUST
MPI AutomotiveRRP$4936.68Toyota UZJ100 LANDCRUISER 4.7L V8 EXTRACTORS, CATS & 3in EXHAUST WITH CENTRE MUFFLER & REAR TAILPIPE (SKU.
View part
Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors
MPI AutomotiveRRP$4905.97Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors & Cat Back with Single 3¼in S.
View part
Landcruiser URJ202 4.6L V8 2012 On, 3in Full System Inc Extractor, Cats
MPI AutomotiveRRP$4870.49MPI Automotive Landcruiser URJ202 4.6L V8 2012 On, 3in Full System Inc Extractor, Cats, Centre & Rear Muffler.
View part
Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust
MPI AutomotiveRRP$4582.89Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust with Centre & Rear Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.