XPS Extractor For Suzuki Jimny 1.5L K15B 2019
Exhaust Systems AustraliaRRP$900.00XPS Extractor.5L K15B 2019 ON for Extractors - Suzuki.
View partsuzuki-vitara-se416-1-6l-g16b-efi-yse-dsf762-gasket
Suzuki Vitara SE416 1.6L G16B EFI ## YSE DSF762 GASKET ##
Suzuki Vitara SE416 1.6L G16B EFI ## YSE DSF762 GASKET ##.
DistributorExhaust Systems Australia
Category: Extractors and headers
RRP $615.00 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- suzuki-vitara-se416-1-6l-g16b-efi-yse-dsf762-gasket
- Supplier
- Exhaust Systems Australia
- Category
- Extractors and headers
- Stock status
- Confirmed on order
This Exhaust Systems Australia extractor set is listed to fit the Suzuki Vitara SE416 with the 1.6L G16B EFI engine, and uses the DSF762 gasket. The MPN is SUZUKI-VITARA-SE416-1-6L-G16B-EFI-YSE-DSF762-GASKET.
What does this part cover?
This is an extractor (header) set for the Suzuki Vitara SE416 running the 1.6L G16B EFI four. Extractors replace the factory exhaust manifold with tuned-length tubes that merge further down, the aim being a freer-flowing path off the head than a cast manifold gives. The listing calls out the DSF762 gasket as the matching seal for this fitment, so that's the consumable to pair with it on install.
What's a set of extractors and what does it change?
Extractors swap the heavy cast manifold for individual primary tubes. Because each cylinder gets a more even path to the collector, the engine breathes a little easier on the exhaust side. On a small-capacity engine like the 1.6L Vitara that's a modest change rather than a transformation, and it's a common first step for owners tidying up an older exhaust. We can't quote any power or sound figures — none are published by the supplier.
Will it suit my Suzuki Vitara?
It's listed to fit the Suzuki Vitara SE416 with the 1.6L G16B EFI engine. Fitment data can be imperfect, so treat this as listed to fit rather than guaranteed; send your exact build to the workshop and we'll confirm it before ordering, along with the DSF762 gasket it calls for.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractors in-house across the Illawarra. We check the head flange and clearances, fit the new DSF762 gasket, and torque the set down properly so it seals. At $615 AUD RRP it's worth booking the bay so the job's done once.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which gasket does this use?
- The listing specifies the DSF762 gasket for this Suzuki Vitara SE416 fitment. We fit a fresh gasket as part of the install.
- Will it fit my Vitara?
- It's listed to fit the SE416 with the 1.6L G16B EFI engine. Confirm your exact variant with the workshop before ordering.
- What does it cost?
- $615 AUD RRP through Exhaust Systems Australia. Fitting is quoted separately by the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Suzuki Sierra SJ413 1.3L G13A, G13B 4WD ## USE DSF058 GASKET ##
Exhaust Systems AustraliaRRP$560.00Exhaust Systems Australia Suzuki Sierra SJ413 1.3L G13A, G13B 4WD ## USE DSF058 GASKET ##.
View part
Suzuki Liana 1.8L Sedan Wagon 3/04-8/07 M18A Manifold Cat Euro 4
Exhaust Systems AustraliaRRP$415.00Suzuki Liana 1.8L Sedan Wagon 3/04-8/07 M18A Manifold Cat Euro 4 for Emission Control - Direct Fit Cats - Suzuki.
View part
SUZUKI SWIFT SG HATCHBACK, SX4 4CYL 1.5L M15A, 1.6L M16A 11/04 - 01/11
Exhaust Systems AustraliaRRP$340.00SUZUKI SWIFT SG HATCHBACK, SX4 4CYL 1.5L M15A, 1.6L M16A 11/04 - 01/11 MANIFOLD CAT EURO.
View part
Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Full System, Extractor, Cat
MPI AutomotiveRRP$3507.46MPI Automotive Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Full System, Extractor, Cat, Centre Hotdog & Rear Muffler.
View part
Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Extractor, Cat, Without Centre
MPI AutomotiveRRP$3272.79MPI Automotive Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Extractor, Cat, Without Centre Muffler & With Rear Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.