TB1610

TB1610 Torsion BAR for Toyota Landcruiser 100 Series / VX (ifs) Hdj100, Hzj100, UZJ100

TB1610 Torsion BAR.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
TB1610 Torsion BAR for Toyota Landcruiser 100 Series / VX (ifs) Hdj100, Hzj100, UZJ100 Wagon (diesel) product image

Part specs

heights
[]
positions
['Front']
shock_types
[]
vehicle_count
1

The RAW 4x4 TB1610 is a torsion bar listed to fit the diesel Toyota Landcruiser 100 Series VX IFS wagon (HDJ100, HZJ100, UZJ100). The diesel fitment matters: the heavier oil-burner front end is sprung differently to the petrol, and this bar is matched to it.

Why the diesel torsion bar differs

The IFS front of the 100 Series is sprung by a torsion bar — a steel bar that twists to carry the front weight and set ride height. A diesel 100 carries more weight over the front axle than the petrol, so it runs a bar suited to that load. The TB1610 is RAW 4x4's torsion bar for the diesel VX 100. The supplier hasn't published rate or length, so we don't quote them and confirm the correct bar at quote time.

Which 100 Series does it suit?

It's listed to fit the diesel VX 100 Series IFS wagon — HDJ100, HZJ100 and UZJ100. The diesel designation is what separates this bar from the petrol part, and torsion bars are often side-specific. Confirm your variant and the side you need with the workshop before ordering.

Pricing

There's no published RRP against the TB1610 in our records. We'll quote it directly for your diesel 100.

Fitting and adjustment at Oak Flats

Oak Flats Muffler Men fits and sets up 100 Series torsion bars in-house across the Illawarra, setting front height and arranging an alignment where the geometry change calls for it. It's listed to fit the diesel VX 100; send your details and we'll confirm the bar and book the work.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the TB1610 the diesel or petrol bar?
It's listed for the diesel VX 100 Series IFS wagon. The petrol 100 uses a different torsion bar — confirm your variant with the workshop.
Does it need an alignment after fitting?
Setting torsion-bar height alters front geometry, so an alignment is often required. We'll advise at quote time.
What does it cost?
No RRP is published in our records. Contact the workshop for a quote.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.