Mazda E Van 1.5 - 2.0L Square Port Universal Fit - Ceramic Coated
MPI AutomotiveRRP$911.56Mazda E Van 1.5 - 2.0L Square Port Universal Fit - Ceramic Coated (Silver).
View partEMG167
Laser KC, KE, Mazda 323 1.6L [DSF] Extractor Gasket
Laser KC, KE, Mazda 323 1.6L [DSF] Extractor Gasket for selected vehicle applications.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $13.48 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
![Laser KC, KE, Mazda 323 1.6L [DSF] Extractor Gasket product image](/media/parts/mpi/emg167-laser-kc-ke-mazda-323-1-6l-dsf-extractor-gasket-1.webp)
Part specs
- SKU
- EMG167
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Stock status
- In stock at supplier
The MPI Automotive EMG167 is an extractor/manifold gasket listed to fit the Mazda 323 (Laser KC/KE platform) with the 1.6-litre engine. It's the flat seal between the cylinder head and the extractor or factory manifold — the gasket, not the header itself.
What does this gasket seal?
The EMG167 seals the joint where the extractor or factory manifold meets the cylinder head on the 1.6-litre four. Its job is to keep exhaust gas inside the runner rather than leaking at the flange. It's a small, replaceable consumable that sits between two machined faces and takes the full heat cycle of the exhaust every time the engine warms and cools.
When do you renew an extractor gasket?
An extractor gasket is renewed whenever that head-to-manifold joint is opened — new extractors, a head off, or chasing a leak — because heat cycling hardens the old material so it won't reseal cleanly. A tired gasket ticks or hisses under throttle and can let fumes past the flange. It doesn't change how the engine runs; it simply keeps the joint gas-tight through the engine's heat cycles, which is why fitting a fresh one with any manifold work is standard practice.
Will it suit my Mazda 323?
The EMG167 is listed to fit the Mazda 323 on the 1.6-litre engine. Other capacities and head castings take different gaskets, so confirm your exact engine and flange pattern with the workshop before ordering — feed data on small parts like this can be imperfect, so we treat the listing as the starting point.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits 323 extractors and gaskets in-house across the Illawarra. The job means cleaning both faces back to bare metal, checking the flange is flat and not warped, and tightening evenly so the gasket seals without being pinched or distorted. The EMG167 is supplied by MPI Automotive at an RRP of $13.48; contact us to confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the EMG167 fit?
- It's listed to fit the Mazda 323 with the 1.6-litre engine. Confirm your exact engine and flange with the workshop first.
- Is this just the gasket on its own?
- Yes — it's the seal between the head and the extractor or manifold, not the header or any pipework.
- Can you fit it?
- Yes. Oak Flats Muffler Men fits 323 gaskets and extractors in the Illawarra; contact us to book.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mazda MX5 NA 1.8 LT DOHC Nov 1993 - 1997 Extractor
MPI AutomotiveRRP$781.70MPI Automotive Mazda MX5 NA 1.8 LT DOHC Nov 1993 - 1997 Extractor.
View part
Mazda 6 GY GV GG 1031 2.3L AUG 02 on, Direct Fit Extractor
MPI AutomotiveRRP$713.12Mazda 6 GY GV GG 1031 2.3L AUG 02 on, Direct Fit Extractor.
View part
Mazda T3500 4cyl Diesel, Rod Gear Change Extractor
MPI AutomotiveRRP$556.74Mazda T3500 4cyl Diesel, Rod Gear Change Extractor (SKU: FX-354) Engineered. Quality guaranteed.
View part
Mazda E Van 1.5 - 2.0L Square Port Universal Fit
MPI AutomotiveRRP$350.38Mazda E Van 1.5 - 2.0L Square Port Universal Fit (FX-152) Fits MAZDA. Fast shipping, warranty included.
View part
Mazda B2600-Ford Raider 2.6L EFI Manifold Gasket
MPI AutomotiveRRP$47.97Mazda B2600-Ford Raider 2.6L EFI Manifold Gasket for selected vehicle applications.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.