EVC Throttle Controller for HOLDEN COLORADO & ISUZU D-MAX
SWDRRP$299.00EVC Throttle Controller.
View partEVC525L
Ultimate9 Throttle Controller for Holden Commodore (01/2013 - on)
Ultimate9 Ultimate9 Throttle Controller.
BrandUltimate9SWD
Category: Performance chips and ECU remaps
RRP $299.00 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- EVC525L
- Supplier
- SWD
- Category
- Performance chips and ECU remaps
- Stock status
- In stock at supplier
The Ultimate9 EVC525L, supplied by SWD, is a throttle controller listed to fit the Holden Commodore from 2013. It plugs into the accelerator-pedal harness to sharpen throttle response, leaving the factory engine calibration untouched.
What the EVC525L does on a Commodore
The Commodore from 2013 uses a drive-by-wire pedal mapped soft from the factory for smooth, easy low-speed driving. The EVC525L intercepts that pedal signal and remaps it through selectable modes, so the same pedal travel asks for throttle sooner. It changes pedal feel only — fuelling and the ECU tune are untouched.
Is the EVC525L listed for my Commodore?
It's listed to fit the Holden Commodore from 2013. Because the controller keys off the pedal connector, confirm your exact build and connector with the workshop before ordering so the harness matches your vehicle.
Throttle response, not a remap
The EVC525L isn't a tune and won't change the Commodore's published outputs. We don't quote power, torque or economy figures for it. The factory calibration is left in place; the benefit is a more immediate throttle for everyday driving.
Fitting at Oak Flats Muffler Men
We supply and fit the EVC525L in-house across the Illawarra. It plugs into the accelerator harness with the controller mounted in the cabin; bring the Commodore in and we'll confirm the connector and set the response modes. It's a tidy plug-in install with nothing cut or welded, and the controller carries an RRP of $299. If it's not in stock we can special-order it through SWD against your Commodore build, then set the response modes with you on handover.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the EVC525L suit my 2013-on Commodore?
- It's listed to fit the Holden Commodore from 2013. Confirm your exact year and pedal connector with the workshop before ordering.
- Is it a remap?
- No. It's a throttle response controller that adjusts the pedal signal only and leaves the engine tune unchanged.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More performance chips and ecu remaps the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Book the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.