EVC703L

EVC Throttle Controller for HOLDEN COLORADO, RODEO & MG 6

EVC Throttle Controller. Fast.

BrandUltimate9SWD

Category: Performance chips and ECU remaps

RRP $299.00 AUD
Order in
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
EVC Throttle Controller for HOLDEN COLORADO, RODEO & MG 6 product image

Part specs

SKU
EVC703L
Supplier
SWD
Category
Performance chips and ECU remaps
Stock status
Order in

The EVC703L is an Ultimate9 EVC throttle controller listed to fit the Holden Colorado, Rodeo and MG 6. It plugs in at the accelerator pedal to reshape how quickly the drive-by-wire signal builds, sharpening or softening pedal response without touching the engine tune.

What is a throttle controller, and what does it actually change?

A throttle controller like the EVC703L sits between the accelerator pedal and the vehicle's electronic throttle. Drive-by-wire pedals send a sensor signal to the ECU rather than pulling a cable, and factory mapping often introduces a soft ramp off idle. The Ultimate9 EVC remaps that pedal signal so the throttle opens more directly for a given pedal travel, which makes the vehicle feel more responsive. It doesn't change fuelling, boost or the engine's tune — it only alters the pedal-to-throttle relationship, and can be wound back toward standard whenever you want.

Will it suit my Holden Colorado or Rodeo?

The EVC703L is listed to fit the Holden Colorado and Rodeo, along with the MG 6, using the EVC's vehicle-specific plug. Because it taps into the factory pedal connector, fitment depends on your exact pedal plug and model year. Send us your build and we'll confirm the EVC703L is the right part number for your vehicle before you order — fitment data can be imperfect, so it's listed to fit rather than guaranteed.

Is it road legal, and does it add power?

This is a pedal-response device, not an engine remap, so it doesn't alter emissions hardware or the published tune. It changes how the throttle reacts to pedal input, which is why it's described in terms of response and feel rather than output figures — we don't publish power, torque or economy numbers for it because they aren't supplied. Raise any questions about your specific setup with us.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men fits the Ultimate9 EVC703L at our Oak Flats workshop in the Illawarra. It's a plug-in unit that connects at the accelerator pedal with the supplied harness and a compact control display; no cutting into the factory loom is needed. We'll set it up, confirm the modes work across your pedal range, and walk you through the controller before you drive away.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the EVC703L change my engine's tune?
No. It only remaps the accelerator pedal signal to sharpen or soften throttle response. It doesn't touch fuelling, boost or the ECU calibration.
Will it fit my Holden Colorado?
It's listed to fit the Holden Colorado, Rodeo and MG 6 via the EVC's vehicle-specific plug. Confirm your exact model and pedal connector with the workshop before ordering.
Can I turn the effect down again?
Yes. The EVC's settings can be adjusted, including back toward a standard or softer response, so you're not locked into one mode.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.