Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1867.20Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Cat, Muffler and Resonator (KB9200-XCMR) at $1867.20 RRP.
View partKB9200-XCXR
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Cat and Resonator (SKU: KB9200-XCXR), $1748.74
BrandPacemaker
Category: Mufflers and resonators
RRP $1748.74 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- KB9200-XCXR
- Supplier
- Pacemaker
- Category
- Mufflers and resonators
- Vehicle fitment
- Mitsubishi PB PC
- Stock status
- Confirmed on order
Fitted with a rear resonator behind the retained catalytic converter, the Pacemaker KB9200-XCXR is the drone-tuned build of this 3in exhaust system for the Mitsubishi Challenger (PB/PC, 2.5L 4D56T). The resonator targets cruise frequencies, so it delivers a balanced note — fuller than stock, but settled enough to stay liveable on the highway.
What does the rear resonator do for drone?
A resonator is a tuning device, not a volume control: it cancels a specific frequency band rather than broadly muffling, and on a diesel like the Mitsubishi Challenger PB/PC the target is the boom that creeps into the cabin at a constant cruise. Sitting at the rear, it lets the system breathe more freely than a muffler would while keeping that drone in check — a popular balance for owners who want more presence than stock without a tiresome highway hum.
What does this system keep?
This build keeps the catalytic converter, so the factory emissions hardware the Mitsubishi Challenger PB/PC left the showroom with stays in place — the rearward section is what's being upgraded here. Confirm any state requirements with the workshop before fitting.
Will it suit my Mitsubishi Challenger PB/PC?
It's listed to fit the Mitsubishi Challenger (PB/PC, 2.5L 4D56T), 2009–2015. Note this listing is for the manual variant, so fitment data can be imperfect, so send your exact build and we'll confirm the variant, the 3in pipework and clearances before ordering. It's listed at $1,748.74 AUD; supply is confirmed at order.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits exhaust systems like this in-house across the Illawarra. We check hanger and crossmember clearances, confirm the silencing layout suits how you drive, and book the bay once your build is matched. The part is listed to fit the Mitsubishi Challenger PB/PC; we'll verify the exact fitment with you rather than relying on the catalogue alone.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the KB9200-XCXR fit my Mitsubishi Challenger PB/PC?
- It's listed to fit the Mitsubishi Challenger (PB/PC, 2.5L 4D56T), 2009–2015. Confirm your exact variant (this listing is the manual) with the workshop before ordering.
- Will the resonator stop highway drone?
- The rear resonator is tuned to cut the constant-cruise frequencies that cause cabin boom, so it helps keep the note liveable while still freeing the system up versus stock.
- Does it keep the catalytic converter?
- Yes — this is a with-cat build, so the factory catalytic converter stays in place. Confirm any state road requirements with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1736.99Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Cat and Muffler.
View part
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1618.45Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Cat no Mufflers.
View part
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1553.13Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Muffler and Resonator (KB9200-XXMR) at $1553.13 RRP.
View part
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1434.66Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Resonator.
View part
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1422.90Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Muffler (SKU: KB9200-XXMX), $1422.90 from Pacemaker.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.