Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1867.20Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Cat, Muffler and Resonator (KB9200-XCMR) at $1867.20 RRP.
View partKB9200-XXMR
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Muffler and Resonator (KB9200-XXMR) at $1553.13 RRP.
BrandPacemaker
Category: Mufflers and resonators
RRP $1553.13 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- KB9200-XXMR
- Supplier
- Pacemaker
- Category
- Mufflers and resonators
- Vehicle fitment
- Mitsubishi PB PC
- Stock status
- Confirmed on order
The Pacemaker KB9200-XXMR is a single 3in exhaust system listed to fit the manual Mitsubishi Challenger PB–PC 2.5L 4D56T turbo-diesel (2009–2015), built with a muffler and a resonator and no catalytic converter. The cat-less, resonator-and-muffler build is the defining feature — the off-road version that still chases drone with a resonator.
Is it road legal?
This system comes without a catalytic converter, so on a road-relevant diesel it is not ADR 79/04 compliant for road registration in NSW and is intended for off-road use only. We won't soften that — removing the converter changes the emissions hardware the Challenger left the factory with. If road registration matters, the with-cat version is the one to look at. Confirm your intended use with the workshop before fitting.
What does the resonator add?
Even as the off-road build, this system keeps a resonator alongside its muffler. The resonator targets a specific frequency to cut drone without a broad change in volume, so the cabin stays more liveable at cruise while the muffler handles general quietening. It's a more resolved pairing than a muffler on its own. No decibel figures are published, so we won't quote any.
What does the 3in manual system cover?
At a 3in bore, this is sized up from a tighter stock system for the 2.5L 4D56T, listed specifically for the manual Challenger so the routing suits the gearbox and crossmember. The 3in figure is the hard number; material isn't published, so we won't claim stainless or aluminised. Confirm your exact Challenger and that it's the manual with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits the KB9200-XXMR in-house across the Illawarra. We check the 3in routing under the Challenger, confirm the muffler and resonator positions and clearance, and fit the system as a complete off-road section. Send your build and we'll confirm and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the KB9200-XXMR road legal?
- No — it has no catalytic converter, so it's not ADR 79/04 compliant for road registration in NSW and is for off-road use only.
- Does it still have a resonator?
- Yes — even as the off-road build it keeps a resonator to cut drone, paired with a muffler for general quietening.
- Will it fit my Challenger?
- It's listed to fit the manual Challenger PB–PC 2.5L 4D56T (2009–2015). Confirm your exact wagon and that it's the manual with the workshop first.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1748.74Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Cat and Resonator (SKU: KB9200-XCXR), $1748.74
View part
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1736.99Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Cat and Muffler.
View part
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1618.45Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Cat no Mufflers.
View part
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1434.66Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Resonator.
View part
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1422.90Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Muffler (SKU: KB9200-XXMX), $1422.90 from Pacemaker.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.