Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1867.20Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Cat, Muffler and Resonator (KB9200-XCMR) at $1867.20 RRP.
View partKB9200-XCXX
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Cat no Mufflers.
BrandPacemaker
Category: Mufflers and resonators
RRP $1618.45 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- KB9200-XCXX
- Supplier
- Pacemaker
- Category
- Mufflers and resonators
- Vehicle fitment
- Mitsubishi PB PC
- Stock status
- Confirmed on order
The Pacemaker KB9200-XCXX is the straight-through, no-muffler build of this 3in with-cat cat-back system for the Mitsubishi Challenger (PB/PC, 2.5L 4D56T). With no centre muffler or rear resonator in the run, it flows the freest and carries a louder, harder note than the muffled options, since gas passes through with the least obstruction.
What does a straight-through, no-muffler layout do?
Deleting the centre muffler and rear resonator leaves the gas an unobstructed path from front to tailpipe, which is why this is the loudest and freest-flowing build of the Mitsubishi Challenger PB/PC range. There's nothing absorbing or reflecting the pulses, so the diesel's note comes through fuller and harder, particularly under load. It's the build buyers pick when they want the bluntest sound and the least restriction; if you'd rather keep cabin drone down, the resonator or muffler versions of this system suit better.
What does a cat-back system replace?
A cat-back system replaces the exhaust from the catalytic converter back, leaving the cat and the rest of the emissions hardware in place. On the Mitsubishi Challenger PB/PC this build keeps the catalytic converter, so it's the rearward upgrade rather than an engine-back change. Confirm any state requirements with the workshop before fitting.
Will it suit my Mitsubishi Challenger PB/PC?
It's listed to fit the Mitsubishi Challenger (PB/PC, 2.5L 4D56T), 2009–2015. Note this listing is for the manual variant, so fitment data can be imperfect, so send your exact build and we'll confirm the variant, the 3in pipework and clearances before ordering. It's listed at $1,618.45 AUD; supply is confirmed at order.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits cat-back systems like this in-house across the Illawarra. We check hanger and crossmember clearances, confirm the silencing layout suits how you drive, and book the bay once your build is matched. The part is listed to fit the Mitsubishi Challenger PB/PC; we'll verify the exact fitment with you rather than relying on the catalogue alone.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the KB9200-XCXX fit my Mitsubishi Challenger PB/PC?
- It's listed to fit the Mitsubishi Challenger (PB/PC, 2.5L 4D56T), 2009–2015. Confirm your exact variant (this listing is the manual) with the workshop before ordering.
- How does the no-muffler build sound?
- Louder and harder than the resonator or muffler versions, because there's nothing in the run absorbing the pulses. If cabin drone matters to you, the silenced builds suit better.
- Does it keep the catalytic converter?
- Yes — this is a with-cat build, so the factory catalytic converter stays in place. Confirm any state road requirements with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1748.74Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Cat and Resonator (SKU: KB9200-XCXR), $1748.74
View part
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1736.99Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Cat and Muffler.
View part
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1553.13Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Muffler and Resonator (KB9200-XXMR) at $1553.13 RRP.
View part
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1434.66Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Resonator.
View part
Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3"
PacemakerRRP$1422.90Mitsubishi Challenger PB/PC 2.5L (4D56T) 2009-2015 Manual - Single 3" Exhaust System with Muffler (SKU: KB9200-XXMX), $1422.90 from Pacemaker.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.