KBD4215-XXXX

Ford Ranger Raptor PX3 2.0L Bi-Turbo Diesel (YN2S) 2018 to 2021 DPF Model – Single 3"

Ford Ranger Raptor PX3 2.0L Bi-Turbo Diesel (YN2S) 2018 to 2021 DPF Model, Single 3" (DPF Back) Exhaust System Without Muffler

BrandPacemaker

Category: Mufflers and resonators

RRP $879.35 AUD
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Ford Ranger Raptor PX3 2.0L Bi-Turbo Diesel (YN2S) 2018 to 2021 DPF Model – Single 3" (DPF Back) Exhaust System Without Muffler or Resonator product image

Part specs

SKU
KBD4215-XXXX
Supplier
Pacemaker
Category
Mufflers and resonators
Vehicle fitment
Px 3 (2018-2022)
Stock status
Confirmed on order

Stripped of both muffler and resonator, the Pacemaker KBD4215-XXXX is the straight-through 3in dpf-back for the Ford Ranger Raptor (PX3 2.0L bi-turbo diesel, YN2S, 2018–2021, DPF). It is the most open and loudest build in the Raptor family, with nothing in the run to soften the note.

What a no-silencer Raptor build sounds like

With no muffler and no resonator anywhere behind the DPF, this is the free-flowing end of the Pacemaker Raptor range. Expect a louder, harder bi-turbo diesel note than either the muffled or resonated build, because nothing is reflecting or absorbing the sound on the way out. It suits a Raptor owner who wants the most uncompromised flow and is comfortable with the volume.

DPF-back scope on the Raptor

A DPF-back replaces the system from behind the diesel particulate filter to the tailpipe, leaving the DPF and upstream emissions hardware in place. Pacemaker builds this at 3in for the 2.0L bi-turbo. It is listed for the Raptor body specifically, which packages differently to the standard Ranger.

Will it suit my Raptor?

It is listed to fit the Ford Ranger Raptor PX3 2.0L bi-turbo (YN2S) from 2018–2021, DPF model. The listing is a guide rather than a guarantee, so we confirm your exact build before ordering.

Fitting and a word on volume

Oak Flats Muffler Men fits this Pacemaker Raptor dpf-back in-house in the Illawarra. Because it runs no silencing, we will talk through how loud it is for daily use before you commit — an open build is a deliberate choice, not a default.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the KBD4215-XXXX the loudest Raptor option?
Yes — it runs no muffler and no resonator, so it is the most open and loudest build in the Raptor dpf-back family. We can describe the note before you order.
Can I quieten it down later?
If the straight-through note is too much, ask us about the muffler or resonator builds in the same family — we will help you choose.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.