Mustang FN 5.0L V8 2018-23 3in Full System Centre Hotdogs & Rear
MPI AutomotiveRRP$6985.53Mustang FN 5.0L V8 2018-23 3in Full System Centre Hotdogs & Rear Bi-modal Muffler 4in Quad Tip.
View partMKFD0078
Ford Falcon AU V8 Ute 3in CatBack Muffler/Tailpipe
Ford Falcon AU V8 Ute 3in CatBack Muffler/Tailpipe.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $1050.31 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKFD0078
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
Built for the ute body, the MPI Automotive MKFD0078 is a 3in cat-back system listed to fit the AU Falcon V8 ute. It runs a rear muffler and finishes with a tailpipe, so it's the section behind the catalytic converter rather than a full engine-back replacement.
Why a ute-specific cat-back?
Tray-body Falcons route their exhaust differently to the sedans and wagons — the rear floor, chassis rails and tow gear all sit in different places, so the bends and hanger points are cut to suit a ute. This MKFD0078 is built around that layout in 3in pipe, with a single rear muffler and a tailpipe exit, which is why it's listed for the ute rather than shared across every AU body. The 3in bore suits the V8 it's matched to, giving the larger engine a freer path from the cat back than the factory pipework.
What does a cat-back change, and what stays?
A cat-back replaces everything from the catalytic converter rearward — the over-axle pipe, the muffler and the tailpipe — while leaving the factory cat and the engine-side pipework in place. That keeps the emissions hardware the ute left the factory with, and the muffler here keeps the note civil rather than raucous. It's the common path for owners who want freer flow and a tidy rear section without touching the front of the system.
Will it suit my AU Falcon ute?
It's listed to fit the Ford Falcon AU V8 ute. AU utes came in several specs over the run, so send your exact build to the workshop and we'll confirm the hanger positions and tailpipe routing before ordering. Feed data can be imperfect, so we treat the listing as a starting point and check the vehicle on the hoist.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits this MPI Automotive cat-back in-house. We mount it on the hoist, line up the 3in pipework against the factory hangers, set the muffler and tailpipe clearances, and check there's no contact with the tray or chassis before signing it off. The RRP is held against the MKFD0078 part as a special-order item; we'll confirm availability when you book.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the MKFD0078 a full exhaust or just the back section?
- It's a cat-back, so it replaces the system from the catalytic converter rearward — the muffler and tailpipe — and leaves the factory cat and front pipework in place.
- Will it fit a Falcon AU sedan or wagon?
- No — this one is cut for the AU V8 ute body. The sedan and wagon route the rear exhaust differently and use their own part numbers.
- What pipe size is it?
- 3in, matched to the AU Falcon V8. Confirm your exact ute build with the workshop before we order it in.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System Centre Hotdogs & Rear
MPI AutomotiveRRP$6539.71Mustang FN 5.0L V8 2018-23 3in Full System Centre Hotdogs & Rear Bi-modal Muffler 4in Quad Tip.
View part
Mustang FN 5.0L V8 2018-23 3in Full System Centre Hotdog Rear Mufflers
MPI AutomotiveRRP$6237.51Mustang FN 5.0L V8 2018-23 3in Full System Centre Hotdog Rear Mufflers With 4in Quad Tip.
View part
FORD MUSTANG V8 FN 2018+ 3in FULL SYSTEM WITHOUT CENTRE MUFFLER
MPI AutomotiveRRP$6047.06FORD MUSTANG V8 FN 2018+ 3in FULL SYSTEM WITHOUT CENTRE MUFFLER WITH REAR MUFFLERS & QUAD TIPS.
View part
Mustang FM 5.0L V8 2015-2017 3in Full System, Centre Hotdogs And Rear
MPI AutomotiveRRP$6012.36Mustang FM 5.0L V8 2015-2017 3in Full System, Centre Hotdogs And Rear Mufflers With Single 4in Tips (SKU.
View part
FORD MUSTANG V8 FM 2015 - 2017 3in FULL SYSTEM WITHOUT CENTRE MUFFLER
MPI AutomotiveRRP$5821.92FORD MUSTANG V8 FM 2015 - 2017 3in FULL SYSTEM WITHOUT CENTRE MUFFLER WITH REAR MUFFLERS & TWIN TIPS.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.