Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3”
PacemakerRRP$6010.22Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3” Inch Exhaust System with Ceramic Coated Headers and Cats, Quad Tip Rear (Will.
View partPH4096_L_R
PH 4096 Raised Ported Cylinder Heads 3V XR-XF Falcon
PH 4096 Raised Ported Cylinder Heads 3V XR-XF Falcon.
BrandPacemaker
Category: Extractors and headers
RRP $1537.66 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH4096_L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Ford XA XB XC
- Stock status
- Confirmed on order
The Pacemaker PH4096 is a raised, ported cylinder head set listed to suit the 3V Ford Falcon (XR-XF). It's a left-and-right head component, not an exhaust system, so it's described here for what the listing says it is.
What is this part?
PH4096 is a set of raised, ported cylinder heads supplied as a left-and-right pair for the 3V Falcon. Cylinder heads sit on top of the engine block and carry the valves and ports; "raised" and "ported" describe how these have been worked relative to standard. This is engine top-end hardware rather than pipework, so it's not a muffler, cat or exhaust section — the listing gives us the head description and the vehicle, and that's the honest scope of what we can say.
Where do raised ported cylinder heads sit in the build?
Cylinder heads are at the heart of the engine's breathing, between the inlet and the exhaust ports. Porting reshapes those passages; the "raised" description points to a changed port layout versus the factory casting. The usual context for a part like this is a built or competition-leaning engine where the heads are part of a wider package. We hold no flow, power or compression figures for these, so we don't quote any — the supported claim is simply that they're a raised, ported head set for the 3V Falcon.
Will they suit my Ford Falcon?
They're listed to suit the 3V Ford Falcon across the XR-XF range. The supplier hasn't published a specific engine, year or build detail beyond that, so this is the kind of part where confirming your exact engine and intended use with the workshop matters before you commit. Recommended retail is $1,537.66 for the pair.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men can advise on and supply this raised, ported head set as part of a Falcon build across the Illawarra. Heads are an engine-internals job rather than a bolt-on exhaust, so we'll talk through your engine spec and how the heads fit the rest of your combination. Send your Falcon's details and we'll confirm suitability.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PH4096 an exhaust part?
- No. It's a raised, ported cylinder head set — engine top-end hardware, not a muffler, cat or pipe section.
- What does it suit?
- It's listed to suit the 3V Ford Falcon across the XR-XF range, supplied as a left-and-right pair.
- Are flow or power figures published?
- No. The supplier hasn't published flow, power or compression figures for these heads, so we don't quote any. Confirm your build details with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch
PacemakerRRP$6010.22Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch Exhaust System with Ceramic Coated Headers and Cats, Quad Tip Rear (Will fit RH.
View part
Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3”
PacemakerRRP$5228.28Pacemaker Australia Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3” Inch Exhaust System with Headers and Cats, Quad Tip Rear (Will.
View part
Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch
PacemakerRRP$5228.28Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch Exhaust System with Headers and Cats, Quad Tip Rear (Will fit RH Drive Only).
View part
Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3”
PacemakerRRP$3398.47Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3” Inch Ceramic Coated Headers and Cats to suit Factory Exhaust (Will fit RH Drive.
View part
Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch
PacemakerRRP$3398.47Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch Ceramic Coated Headers and Cats to suit Factory Exhaust (Will fit RH Drive.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.