Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3”
PacemakerRRP$6010.22Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3” Inch Exhaust System with Ceramic Coated Headers and Cats, Quad Tip Rear (Will.
View partPH4097_L_R
PH 4097 Raised Ported Cylinder Heads 3V XR-XF Falcon 2" Competition Header
Pacemaker Australia PH 4097 Raised Ported Cylinder Heads 3V XR-XF Falcon 2" Competition Header.
BrandPacemaker
Category: Extractors and headers
RRP $1537.66 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH4097_L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Ford XA XB XC
- Stock status
- Confirmed on order
The Pacemaker PH4097 is a 2in competition header set listed to suit the 3V Ford Falcon (XR-XF), matched to raised, ported cylinder heads. It's a left-and-right header pair built for the worked-head combination rather than a standard road manifold.
What does this header set cover?
PH4097 is the L/R competition header pair for the 3V Falcon, with the listing tying it to raised, ported cylinder heads. The 2in figure is the primary tube size — the diameter of each runner off the head before they merge. Described as a competition header, it's the front-of-exhaust section designed to suit the worked-head port layout, so it's the manifold replacement rather than a full system.
What is a competition header and what does it change?
A header, or extractor, replaces the cast manifold with tubular primaries — one tube per cylinder into a collector. A "competition" header is typically matched to a built engine and a non-standard port layout, here the raised, ported 3V heads. The general trade-off is a freer gas path against a more involved fit and a louder, different note than stock. We publish no power or sound figures, so we describe it only as a 2in competition header set for the raised-port 3V Falcon — a build-focused part, not a measured gain.
Will it suit my Ford Falcon?
It's listed to suit the 3V Ford Falcon across the XR-XF range, matched to the raised, ported heads. No specific engine or year is published beyond that, and because it's a competition-oriented part its suitability depends on your wider build — so confirm with the workshop before ordering. Recommended retail is $1,537.66 for the pair.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits competition header sets like this in-house across the Illawarra. With a worked-head combination we check the primary-tube clearances and how the 2in headers suit your port layout and the rest of the system. Send your Falcon's build details and we'll confirm the fitment.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- How is the PH4097 different from the PH4096 heads?
- The PH4096 is the raised, ported cylinder head set. The PH4097 is the matched 2in competition header pair listed to suit those heads — the exhaust front section, not the heads themselves.
- What does the 2in figure mean?
- It's the primary tube diameter — the size of each runner coming off the head before the tubes collect together.
- Will it fit a standard Falcon?
- It's listed as a competition header to suit the raised, ported 3V Falcon heads. Because it's build-focused, confirm your engine and head combination with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch
PacemakerRRP$6010.22Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch Exhaust System with Ceramic Coated Headers and Cats, Quad Tip Rear (Will fit RH.
View part
Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3”
PacemakerRRP$5228.28Pacemaker Australia Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3” Inch Exhaust System with Headers and Cats, Quad Tip Rear (Will.
View part
Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch
PacemakerRRP$5228.28Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch Exhaust System with Headers and Cats, Quad Tip Rear (Will fit RH Drive Only).
View part
Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3”
PacemakerRRP$3398.47Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3” Inch Ceramic Coated Headers and Cats to suit Factory Exhaust (Will fit RH Drive.
View part
Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch
PacemakerRRP$3398.47Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch Ceramic Coated Headers and Cats to suit Factory Exhaust (Will fit RH Drive.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.