Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3”
PacemakerRRP$6010.22Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3” Inch Exhaust System with Ceramic Coated Headers and Cats, Quad Tip Rear (Will.
View partPH4496_Kit_-_Falcon
PH 4496 Competition Header 4L Twin Cam Barra BA-FG Falcon
PH 4496 Competition Header 4L Twin Cam Barra BA-FG Falcon.
BrandPacemaker
Category: Extractors and headers
RRP $843.22 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH4496_Kit_-_Falcon
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Ford BA BF FG
- Stock status
- Confirmed on order
The Pacemaker PH4496 Falcon kit (MPN PH4496_KIT_-_FALCON) is a competition header for the 4L twin-cam Barra six, listed to fit the Ford Falcon BA to FG. It's a header kit built for the inline Barra.
What is this competition header?
This is a competition-grade header for the 4L twin-cam Barra inline six, supplied as a kit and listed for the Ford Falcon BA through FG. Pacemaker labels it a competition header, which signals it's aimed at performance use rather than a stock replacement. On a Barra — the engine Falcon owners build hard — the header is the front of the exhaust, so the rest of the system is matched behind it. No diameter, flow or power figures are published by the supplier.
What are headers and what do they change?
Headers (extractors) replace the cast factory manifold with tubular primaries that give each cylinder a tuned path out. On a turbo or built Barra they're a common early step because the standard manifold is a known restriction. As a competition kit this set is oriented toward performance use, so where and how it's run matters. What it delivers depends on the rest of the exhaust and the tune — we publish no numbers and won't quote any.
Will it suit my Ford Falcon?
It's listed to fit the Ford Falcon BA to FG with the 4L twin-cam Barra. That BA-FG span and the Barra engine are the defining details, so confirm your exact model and engine with the workshop before ordering — and note this is the Falcon kit, distinct from the Territory version in the same family.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Barra competition headers in the Illawarra. We check primary clearance, fit fresh gaskets, and plan the system from the collector back. Because it's a competition header, we'll confirm how the car is used and built first. RRP is listed at 843 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PH4496 Falcon kit for the Barra?
- Yes — it's a competition header for the 4L twin-cam Barra six, listed for the Ford Falcon BA to FG. Confirm your exact model with the workshop.
- Is this the same as the Territory kit?
- No — this is the Falcon kit. The Territory version is a separate listing in the same PH4496 family. Confirm which suits your vehicle with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch
PacemakerRRP$6010.22Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch Exhaust System with Ceramic Coated Headers and Cats, Quad Tip Rear (Will fit RH.
View part
Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3”
PacemakerRRP$5228.28Pacemaker Australia Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3” Inch Exhaust System with Headers and Cats, Quad Tip Rear (Will.
View part
Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch
PacemakerRRP$5228.28Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch Exhaust System with Headers and Cats, Quad Tip Rear (Will fit RH Drive Only).
View part
Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3”
PacemakerRRP$3398.47Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3” Inch Ceramic Coated Headers and Cats to suit Factory Exhaust (Will fit RH Drive.
View part
Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch
PacemakerRRP$3398.47Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch Ceramic Coated Headers and Cats to suit Factory Exhaust (Will fit RH Drive.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.