RL887

RL887 Leaf Spring for Great Wall V Series V200, V240 UTE / Dual CAB

RL887 Leaf Spring. Quality guaranteed.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RL887 Leaf Spring for Great Wall V Series V200, V240 UTE / Dual CAB product image

Part specs

heights
['40mm']
positions
['Rear']
shock_types
[]
vehicle_count
4

RAW 4x4's RL887 is a rear leaf spring listed to fit the Great Wall V-Series V200 and V240 dual-cab ute — the steel pack that supports the tray and holds the back of the chassis at its proper height.

Why replace a leaf spring?

Leaf springs are the hardest-working part of a ute's rear suspension: they carry the payload, support the body and locate the axle, all while flexing over every bump. After years under load they settle, the arch flattens and the rear sits low and tired. The RL887 is RAW 4x4's replacement leaf for the Great Wall V-Series, bringing the rear back to a height and stance the original has lost.

Does the RL887 suit how I use the ute?

The right leaf pack depends on whether the V-Series is mostly unladen or regularly carrying weight, towing or running a canopy. RAW 4x4 doesn't publish a load rating for the RL887 in this record, so rather than guess, tell the workshop how your V200 or V240 is set up and we'll confirm this pack is the correct choice before it's ordered.

What's involved in fitting at Oak Flats?

Oak Flats Muffler Men supplies and fits RAW 4x4 leaf springs across the Illawarra. The job involves supporting the chassis, dropping the axle and swapping the pack, then re-torquing the U-bolts and checking shackles and bushes. It's listed to fit the Great Wall V-Series V200 and V240 dual-cab; confirm your exact build with the workshop before booking.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the RL887 listed for both the V200 and V240?
Yes — it's listed to fit the Great Wall V-Series V200 and V240 dual-cab ute. Confirm your exact variant with the workshop before ordering.
Can you fit the RL887 and check the rest of the rear end?
Yes. We inspect U-bolts, shackle pins and bushes whenever a leaf pack is replaced and advise on anything else that needs attention.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.