HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat
MPI AutomotiveRRP$6245.89HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat & Without Muffler (SKU: SSMKTY0336) Engineered.
View partSSMBM305MF-R7996
Toyota Hilux 2.8L & 3L KUN26R/GUN126R 3in Centre Muffler
Toyota Hilux 2.8L & 3L KUN26R/GUN126R 3in Centre Muffler (SSMBM305MF-R7996) Fits a wide range
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $759.50 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMBM305MF-R7996
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Stock status
- In stock at supplier
The MPI Automotive SSMBM305MF-R7996 is a 3in centre muffler for the Toyota Hilux 2.8L and 3L (KUN26R and GUN126R). As the mid-system muffler it manages the note from the centre of the run rather than at the tailpipe.
What does the centre muffler do on a Hilux?
This is the mid-system muffler in 3in. Sitting in the centre of the exhaust, a chambered/absorptive muffler softens the note before it reaches the rear, taking the edge off resonance in the middle of the run. On a diesel Hilux that means the centre stage does the quietening while the rest of the system carries flow. It's the centre component specifically — not a full system and not a rear muffler — so it pairs with whatever front and rear pipework the truck already runs.
Which Hilux engines and codes is it listed for?
It's listed to fit the Toyota Hilux 2.8L and 3L across the KUN26R and GUN126R codes, so it spans both the older 3L KUN-series and the later 2.8L GUN-series diesels. Because it covers more than one engine and chassis code, confirm your exact model and code with the workshop before ordering so the centre hangers and pipe diameters line up on your truck. The 3in bore suits the diesel's flow through the mid-section.
Is it road legal?
This is a centre muffler only — it doesn't include or delete the catalytic converter, so the cat-delete off-road rules don't apply to this part. The finished note depends on the whole system; confirm the in-service result and any state requirements with the workshop before fitting.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Hilux centre mufflers in-house across the Illawarra, checking the body clears the floor and chassis and mates to your front and rear pipework. The SSMBM305MF-R7996 carries a published RRP of $759.50; send your build and we'll confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will it fit my Hilux?
- It's listed to fit the Toyota Hilux 2.8L and 3L across the KUN26R and GUN126R codes. Confirm your exact model and code with the workshop before ordering.
- Is this the whole exhaust?
- No — it's the 3in centre muffler section only. It pairs with your existing front and rear pipework.
- What does it cost?
- The supplier RRP is $759.50. Contact Oak Flats Muffler Men to confirm price and fitting.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual
MPI AutomotiveRRP$6230.75Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat & Without Muffler.
View part
HFD-VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Pre DPF) 4in Dual
MPI AutomotiveRRP$6070.20HFD-VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Pre DPF) 4in Dual With Cat & No Muffler (SSMKTY0340).
View part
Landcruiser VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Without DPF) 4in
MPI AutomotiveRRP$6055.06Landcruiser VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Without DPF) 4in Dual With Cat & No Muffler.
View part
HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat
MPI AutomotiveRRP$5854.77HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat & Without Muffler.
View part
Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual
MPI AutomotiveRRP$5839.64Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat & Without Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.