HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat
MPI AutomotiveRRP$6245.89HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat & Without Muffler (SKU: SSMKTY0336) Engineered.
View partSSMBM305MF
Toyota Hilux 2.8L & 3L KUN26R/GUN126R 3in Centre Muffler
Toyota Hilux 2.8L & 3L KUN26R/GUN126R 3in Centre Muffler for selected vehicle applications.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $759.50 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMBM305MF
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Stock status
- In stock at supplier
Sized at 3in, the MPI Automotive SSMBM305MF is a centre muffler listed to fit the Toyota Hilux 2.8L and 3.0L turbo-diesels (KUN26R and GUN126R). The 3in bore sets it apart — a mid-system silencer matched across both Hilux diesel platforms.
Why a 3in centre muffler on the Hilux diesels?
The 3in bore suits a turbo-diesel Hilux opened up elsewhere in the system, keeping the mid-section flowing rather than choking it. As a centre muffler it sits in the middle of the run, quietening by chambering at that point and setting the baseline note before the rear section. It's a mid-pipe component, not a complete exhaust, listed across the KUN26R and GUN126R.
Why does it cover both the KUN26R and GUN126R?
The KUN26R 3.0L and GUN126R 2.8L Hilux turbo-diesels share enough of the centre exhaust layout to take a common 3in centre muffler. One part number across both the older 3.0L and the newer 2.8L platform is the practical appeal here, rather than a model-specific section.
Will it suit my Hilux?
It's listed to fit the Toyota Hilux 2.8L and 3.0L turbo-diesel (KUN26R and GUN126R). These ran in several specs, so send your exact build to the workshop and we'll confirm the centre routing and hanger points before ordering. We treat the listing as a guide and check the ute on the hoist first.
What does fitting involve in Illawarra?
Oak Flats Muffler Men supplies and fits this MPI Automotive centre muffler in-house across the Illawarra. We mount the Hilux on the hoist, fit the 3in muffler into the centre section against the factory hangers, and check clearance before sign-off. The SSMBM305MF is held at its listed RRP as a special-order item; we'll confirm availability when you book.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which Hilux models does the SSMBM305MF fit?
- It's listed for the 2.8L and 3.0L turbo-diesels — the KUN26R and GUN126R. Confirm your exact build with the workshop before ordering.
- Where does it mount?
- In the centre of the exhaust, between the front pipework and the rear section. It's a centre muffler, not a full system.
- What size is it?
- 3in, matched to the Hilux diesel platforms it's listed for.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual
MPI AutomotiveRRP$6230.75Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat & Without Muffler.
View part
HFD-VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Pre DPF) 4in Dual
MPI AutomotiveRRP$6070.20HFD-VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Pre DPF) 4in Dual With Cat & No Muffler (SSMKTY0340).
View part
Landcruiser VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Without DPF) 4in
MPI AutomotiveRRP$6055.06Landcruiser VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Without DPF) 4in Dual With Cat & No Muffler.
View part
HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat
MPI AutomotiveRRP$5854.77HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat & Without Muffler.
View part
Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual
MPI AutomotiveRRP$5839.64Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat & Without Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.