SSMBM515MF

Ford Falcon BF FG Sedan 5.4L V8 & Coyote Supercharged 3in Dual LHS Rear Muffler

Ford Falcon BF FG Sedan 5.4L V8 & Coyote Supercharged 3in Dual LHS Rear Muffler for selected vehicle applications.

BrandMantaMPI Automotive

Category: Mufflers and resonators

RRP $1018.64 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Ford Falcon BF FG Sedan 5.4L V8 & Coyote Supercharged 3in Dual LHS Rear Muffler product image

Part specs

SKU
SSMBM515MF
Supplier
MPI Automotive
Category
Mufflers and resonators
Stock status
In stock at supplier

This is the left-hand-side rear muffler of a 3in dual setup — the MPI Automotive SSMBM515MF, listed to fit the Ford Falcon BF and FG sedan with the 5.4L V8 and supercharged Coyote. It's the LHS half of the dual rear, sized at 3in.

What does the LHS-specific muffler mean?

On a dual exhaust, the left and right rear mufflers are handed to suit the routing on each side of the car. The SSMBM515MF is the left-hand-side unit, built for the LHS run of the BF/FG dual system. If you're replacing one side, or matching a pair, the side matters — this is the LHS part number. The 3in bore is matched to the 5.4L and supercharged Coyote V8s it's listed for.

Why 3in on these V8 Falcons?

The 3in bore suits the larger-output V8s in the BF and FG sedan — the 5.4L and the supercharged Coyote — keeping each side of the dual rear flowing rather than choking it down. As a rear muffler it's the last silencer before the tailpipe on its side, setting the final note for the LHS run.

Will it suit my Falcon?

It's listed to fit the Ford Falcon BF and FG sedan with the 5.4L V8 and supercharged Coyote. These ran in several specs, so send your exact build to the workshop and we'll confirm the LHS hanger points and tailpipe routing before ordering. We treat the listing as a guide and check the car on the hoist first.

What does fitting involve in Illawarra?

Oak Flats Muffler Men supplies and fits this MPI Automotive rear muffler in-house across the Illawarra. We mount the car on the hoist, fit the 3in LHS muffler against the factory hangers, set the tailpipe clearance, and check it matches the opposite side before sign-off. The SSMBM515MF is held at its listed RRP as a special-order item; we'll confirm availability when you book.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Which side is the SSMBM515MF?
It's the left-hand-side (LHS) rear muffler of the dual setup. The right side uses its own part number.
Which Falcons does it fit?
It's listed for the BF and FG sedan with the 5.4L V8 and supercharged Coyote. Confirm your exact build with the workshop before ordering.
What size is it?
3in, matched to the V8s it's listed for. It's the rear muffler on the LHS run.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.