HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat
MPI AutomotiveRRP$6245.89HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat & Without Muffler (SKU: SSMKTY0336) Engineered.
View partSSMBM623MF-BSJ
LandCruiser VDJ200 Wagon, B-Section 4in Rear Muffler, Slip Joint Style
LandCruiser VDJ200 Wagon, B-Section 4in Rear Muffler, Slip Joint Style (SSMBM623MF-BSJ) Fits a wide range.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $930.61 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMBM623MF-BSJ
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Stock status
- In stock at supplier
The MPI Automotive SSMBM623MF-BSJ is a 4in rear muffler in stainless, built as a slip-joint B-section for the Toyota Landcruiser VDJ200 wagon. The big 4in bore and the slip-joint design are the headline — it's the rear silencer on a large-bore 200-Series system, made to slide together rather than weld in.
What does the slip-joint B-section design mean?
This is the B-section — a defined rear segment of the system — built in slip-joint style, so it slides into the adjoining pipe and clamps rather than being welded. That makes it easier to fit, align and remove for service on a 200-Series, which matters on a heavy touring wagon where you may need to drop sections for clearance work. As the rear muffler, it's the final silencer before the tailpipe.
Why a 4in rear on a VDJ200?
At 4in this rear is sized for a large-bore 200-Series exhaust — the diameter a built 4.5L V8 turbo-diesel run carries to keep gas moving at the volumes it produces. A bore that size flows freely; the muffler's job is to keep the note manageable on the highway without choking that flow. Stainless construction (the SS in the code) suits a tourer that sees water crossings, dust and long km.
Will it suit my Landcruiser 200?
The SSMBM623MF-BSJ is listed to fit the Toyota Landcruiser VDJ200 wagon. It's a rear B-section, so it pairs with the rest of a 4in system. Confirm your current pipe sizing and that your system is set up for a slip-joint rear with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits 4in rear sections like this in-house across the Illawarra. The slip-joint design lets us align and clamp it cleanly; we check clearance under the rear, set the hangers and seal the joint. RRP is $930.61; bring the 200 in and we'll measure up before booking.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does slip-joint style mean here?
- The B-section slides into the adjoining pipe and clamps rather than being welded, which makes fitting, alignment and later removal for service easier on the 200-Series.
- What bore is the SSMBM623MF-BSJ?
- It's a 4in rear muffler as published by the supplier, sized for a large-bore 200-Series system.
- Is it stainless?
- Yes — the SS in the code denotes stainless construction, chosen for corrosion life on a touring 200-Series wagon.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual
MPI AutomotiveRRP$6230.75Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat & Without Muffler.
View part
HFD-VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Pre DPF) 4in Dual
MPI AutomotiveRRP$6070.20HFD-VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Pre DPF) 4in Dual With Cat & No Muffler (SSMKTY0340).
View part
Landcruiser VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Without DPF) 4in
MPI AutomotiveRRP$6055.06Landcruiser VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Without DPF) 4in Dual With Cat & No Muffler.
View part
HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat
MPI AutomotiveRRP$5854.77HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat & Without Muffler.
View part
Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual
MPI AutomotiveRRP$5839.64Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat & Without Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.