HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat
MPI AutomotiveRRP$6245.89HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat & Without Muffler (SKU: SSMKTY0336) Engineered.
View partSSMBM623MF-BVB
LandCruiser VDJ200 Wagon, B-Section 4in Rear Muffler, V-Band Joint Style
MPI Automotive LandCruiser VDJ200 Wagon, B-Section 4in Rear Muffler, V-Band Joint Style.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $930.61 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMBM623MF-BVB
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Stock status
- In stock at supplier
Built around a 4in bore and a V-band joint, the MPI Automotive SSMBM623MF-BVB is a B-section rear muffler listed to fit the Toyota Landcruiser VDJ200 wagon. The large pipe size and clamp-style V-band connection are what set this one apart.
What does the 4in bore suit?
At 4in this is sized for a bigger or worked turbo-diesel exhaust rather than a stock-pipe car — the larger bore is built to flow with a heavily uprated VDJ200 system where the rest of the pipework has already been opened up. It sits in the rear position as the final muffler stage on the wagon, so it sets the tone the car leaves with after the centre section has done its work.
Why the V-band joint?
The V-band joint style uses a clamped flange rather than a slip-and-clamp or bolted flange, which makes the muffler quicker to align and remove and gives a clean, repeatable seal each time it goes back together. On a section that may come off for servicing the upstream run or swapping a tip, that's a practical detail rather than a cosmetic one — it's why this B-section is called out as the V-band variant.
Will it suit my VDJ200 wagon?
It's listed to fit the Toyota Landcruiser VDJ200 in wagon body; confirm the exact build and the matching B-section pipework with the workshop before ordering, since the V-band joint needs the right mating flange to land correctly. The 200-series runs more than one rear arrangement depending on how the system was built, so the joint style has to be matched rather than assumed.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits B-section mufflers like this in-house across the Illawarra. We check the V-band alignment, the mating flange, hanger positions and clearance over the rear axle on the hoist, then book the bay once your build is confirmed. The RRP is listed, and we'll confirm the joint style suits your existing pipework before we order it in.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What size is the SSMBM623MF-BVB?
- It's a 4in muffler, sized for a larger-bore VDJ200 exhaust rather than a stock-diameter system.
- What is the V-band joint for?
- The V-band is a clamped flange connection that makes this rear section quick to align, seal and remove. It needs the matching flange on the upstream pipe.
- Does it fit the Landcruiser 200 wagon?
- It's listed to fit the Toyota Landcruiser VDJ200 wagon. Confirm your exact build with the workshop first.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual
MPI AutomotiveRRP$6230.75Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat & Without Muffler.
View part
HFD-VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Pre DPF) 4in Dual
MPI AutomotiveRRP$6070.20HFD-VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Pre DPF) 4in Dual With Cat & No Muffler (SSMKTY0340).
View part
Landcruiser VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Without DPF) 4in
MPI AutomotiveRRP$6055.06Landcruiser VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Without DPF) 4in Dual With Cat & No Muffler.
View part
HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat
MPI AutomotiveRRP$5854.77HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat & Without Muffler.
View part
Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual
MPI AutomotiveRRP$5839.64Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat & Without Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.