SSMBM713MF

Chevrolet Camaro Gen 6 V8 6.2L 3in LHS REAR MUFFLER

Chevrolet Camaro Gen 6 V8 6.2L 3in LHS REAR MUFFLER for selected vehicle applications.

BrandMantaMPI Automotive

Category: Mufflers and resonators

RRP $840.90 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Chevrolet Camaro Gen 6 V8 6.2L 3in LHS REAR MUFFLER product image

Part specs

SKU
SSMBM713MF
Supplier
MPI Automotive
Category
Mufflers and resonators
Stock status
In stock at supplier

The left-hand counterpart for the Camaro's twin rear: the MPI Automotive SSMBM713MF is a 3in left-hand-side rear muffler listed to fit the Chevrolet Camaro Gen 6 with the 6.2-litre V8. It's the LHS half of the dual system, shaped specifically to the car's left-side routing.

What makes this the LHS-specific part?

On the Gen 6 Camaro the two rear mufflers mirror each other — the left and right are not the same casting, because each follows its own side's pipework, hanger points and outlet. The SSMBM713MF is the LHS unit, so it's the part to order when the left rear corner is what needs replacing, without disturbing the right side.

Why 3in on the 6.2 Camaro?

The 6.2-litre V8 is a large engine, and 3in per side keeps the rear of the dual system open to match it. As a chambered rear muffler it quietens by absorption and reflection, holding the rear-most tone in check rather than running an open straight-through pipe.

Will it suit my Gen 6 Camaro?

It's listed to fit the Chevrolet Camaro Gen 6 V8 6.2L. Confirm you need the left side — this is the LHS unit and the RHS is separate — and check your exact build with the workshop, as feed data can be imperfect.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men fits left- and right-specific rear mufflers in-house across the Illawarra. We confirm the LHS hangers and outlet sit right under the rear bar, check the balance against the opposite side, and book the bay once verified.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the SSMBM713MF the left or right muffler?
It's the left-hand-side (LHS) rear muffler for the Gen 6 Camaro. The right side is a separate part.
Do I need both sides?
If you're replacing the whole rear, yes — this LHS unit pairs with the separate RHS muffler. If only the left side is worn, this one covers it. Confirm with the workshop.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.