SSMBM714MF

Chevrolet Camaro Gen 6 V8 6.2L 3in RHS REAR MUFFLER

Chevrolet Camaro Gen 6 V8 6.2L 3in RHS REAR MUFFLER (SSMBM714MF) fits selected vehicle applications.

BrandMantaMPI Automotive

Category: Mufflers and resonators

RRP $840.90 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Chevrolet Camaro Gen 6 V8 6.2L 3in RHS REAR MUFFLER product image

Part specs

SKU
SSMBM714MF
Supplier
MPI Automotive
Category
Mufflers and resonators
Stock status
In stock at supplier

Side-specific for the right-hand rear corner: the MPI Automotive SSMBM714MF is a 3in right-hand-side rear muffler listed to fit the Chevrolet Camaro Gen 6 with the 6.2-litre V8. On a twin system each side gets its own muffler, and this is the RHS unit, built to match the car's right-hand routing.

Why a side-specific rear muffler?

The Gen 6 Camaro runs a dual exhaust where the left and right rear mufflers are not interchangeable — each is shaped to its own side's routing, hangers and outlet position. The SSMBM714MF is the RHS half, so it's the part you order to renew or replace the right rear corner specifically, leaving the opposite side as-is.

What does 3in suit on the 6.2 V8?

Three inches is sized for a large engine, and the Camaro's 6.2 V8 is a big-capacity eight. Per side, the 3in bore keeps the rear of the system open for the engine's output, setting the rear-most tone of the car through a chambered muffler rather than a straight-through delete.

Will it suit my Gen 6 Camaro?

It's listed to fit the Chevrolet Camaro Gen 6 V8 6.2L. Make sure you're ordering for the correct side — this is the RHS unit — and confirm your exact build with the workshop, since feed data can be imperfect and the LHS is a separate part.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men fits side-specific rear mufflers in-house across the Illawarra. We confirm the RHS hangers and outlet line up under the rear bar, check it balances against the left side, and book the bay once the fit is verified.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the SSMBM714MF the left or right muffler?
It's the right-hand-side (RHS) rear muffler for the Gen 6 Camaro. The left side is a separate part.
Will one muffler do my whole Camaro exhaust?
No — this is the RHS rear muffler only. The Gen 6 Camaro runs side-specific mufflers, so the left side is ordered separately.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.