SSMKFD0190

Ford FG V8 Sedan 3in L & R CatBack Muffler

MPI Automotive Ford FG V8 Sedan 3in L & R CatBack Muffler/Muffler.

BrandMantaMPI Automotive

Category: Mufflers and resonators

RRP $3836.83 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Ford FG V8 Sedan 3in L & R CatBack Muffler/Muffler product image

Part specs

SKU
SSMKFD0190
Supplier
MPI Automotive
Category
Mufflers and resonators
Vehicle fitment
Ford
Stock status
In stock at supplier

The MPI Automotive SSMKFD0190 is a 3in left-and-right cat-back for the Ford Falcon FG V8 sedan, running twin chambered mufflers. The handed left-and-right routing carries the bigger 3in bore as two separate rear pipes shaped to the sedan body — flow and a balanced split.

What does the left-and-right layout do on the 3in?

A left-and-right cat-back routes the rear as two handed pipes — a left run and a right run — rather than a mirrored straight dual. On the FG sedan that suits the rear floor and exit points, and at 3in it carries the larger bore down each side. Each run finishes through its own chambered muffler, keeping the silencing even across both banks. That handed 3in routing is the signature of this build.

Why the 3in bore with twin mufflers?

A 3in bore gives the FG V8 freer flow and keeps less back-pressure on a worked engine, while two absorptive mufflers keep the result measured rather than open. So you get the bigger pipe with a controlled note. The record gives the 3in bore, the V8 sedan fitment and the muffler-and-muffler layout — no sound or power figures are published.

What does a cat-back replace?

A cat-back swaps the exhaust from behind the catalytic converter to the tailpipes, leaving the cat in place. The SSMKFD0190 is the rear-half system, not engine-back, so the work stays behind the cat. Here that rear half is the handed left-and-right pair finishing through twin mufflers.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men supplies and fits cat-back systems like this in-house across the Illawarra. We mate the 3in run to your catalytic converter, set the handed left-and-right split and align both mufflers and the hangers so the system sits true. It's listed to fit the Ford Falcon FG V8 sedan; send your build and we'll book it in. Confirm compliance for your build with us.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What's distinctive about the SSMKFD0190?
It's the 3in handed left-and-right cat-back with twin mufflers, routed for the FG sedan body — the bigger bore with a balanced split and a controlled note.
Does it keep the catalytic converter?
Yes — it's a cat-back, so it replaces the exhaust from the cat rearward and leaves the factory converter in place. Confirm compliance with the workshop.
Will it fit my FG V8 sedan?
It's listed to fit the Ford Falcon FG V8 sedan. Send your exact build to the workshop so we can confirm the rear layout first.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.