Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0204
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $7030.42 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0204
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
Built around a left-and-right 3in dual layout, the MPI Automotive SSMKFD0204 is an extractor-back system listed to fit the FG GT 5.0L V8 sedan. Twin 3in banks with a muffler in each give the supercharged-era GT a full-bore back end with a settled note.
What does the left-and-right 3in dual layout do?
The SSMKFD0204 runs separate left and right 3in legs off the V8 rather than collecting into one pipe, with a muffler in each bank. On the FG GT 5.0L that mirrors the engine's two-bank breathing with generous bore on each side, and the twin mufflers keep the note settled rather than raucous. It's the dual-pipe header-back route for a GT owner who wants symmetry and flow with a civil tone.
What does the package cover?
It's a header-back system: tuned-length extractors at the cylinder heads, left and right 3in pipework, and a muffler in each bank. The factory cast manifolds and the original FG exhaust both come out and the SSMKFD0204 goes in as one matched set, with the primaries sized to the 3in legs so the V8 system flows as a unit.
What's an extractor and what changes?
Extractors are tuned-length headers replacing the restrictive cast manifolds the FG GT's 5.0L wore from the factory, giving each cylinder its own primary tube before the merge to cut back-pressure and aid scavenging. The honest trade-offs hold: they sit in the engine-bay heat zone, take real labour to fit, and change the note — here kept measured by the muffler in each bank.
Will it suit my FG GT, and what's the fitting?
It's listed to fit the FG GT 5.0L V8 sedan; send your build and Oak Flats Muffler Men will confirm it before ordering. Fitting at our Illawarra workshop means removing the factory manifolds, hanging the extractors, then routing both 3in legs and their mufflers with clearance checks along the floor and over the rear. At an RRP of $7,030.42 it's a special-order set, so we confirm fitment and lead time first.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does 'L and R' mean here?
- It's a left-and-right dual layout — separate 3in legs for each bank of the V8, each carrying its own muffler, rather than one collected pipe.
- Will the SSMKFD0204 fit my FG GT?
- It's listed to fit the FG GT 5.0L V8 sedan. Confirm your exact build with the workshop before ordering, as extractor systems are tied to the specific body and driveline.
- Is it the full back end or just headers?
- It's a header-back system: extractors plus left and right 3in pipework with a muffler in each bank, supplied as one matched SSMKFD0204 kit.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View part
Ford FG GT V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$6991.38Ford FG GT V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.