Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0319
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $7707.93 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0319
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive SSMKFD0319 is a 3in full exhaust system listed to fit the Ford Mustang FN 5.0L V8 (2018). It pairs ceramic-coated extractors with a centre hotdog resonator, a bi-modal valved muffler and a 4in quad tip.
What does the SSMKFD0319 cover?
This is a full 3in system for the FN-series 5.0L V8 Mustang. It starts with HPC ceramic-coated extractors at the heads, runs a centre hotdog resonator, then finishes through a bi-modal muffler and a 4in quad tip. So it's a complete extractor-back package — headers through to the tips — rather than a rear section on its own.
What's a bi-modal valved system and what does it change?
A bi-modal muffler uses an internal valve that opens and closes to switch the exhaust between two paths — a quieter route and a more open one. On this system the valve is paired with a centre hotdog resonator and the main muffler, so the note can shift between contained and louder depending on the valve state, with the workshop able to talk through how it's controlled. The ceramic coating on the extractors is a heat-management finish for the tubular headers. The honest trade-off is that a full extractor-back system with a valve is a more involved fit than a bolt-on rear section, and the supplier publishes no sound figure for us to put a number to.
Will it suit my FN Mustang 5.0L?
It is listed to fit the Ford Mustang FN 5.0L V8 from 2018. This is the V8 build for the FN Mustang, with the ceramic-coated extractors, centre hotdog, bi-modal muffler and 4in quad tip all part of the one package. Confirm your exact build and model year with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits full Mustang systems like this in-house across the Illawarra. We confirm extractor access at the heads, then route the centre hotdog, the bi-modal muffler and the 4in quad tip, checking the valve operates correctly. At an RRP of $7,707.93 it's a build-to-order item; send your FN Mustang details and we'll confirm the fitment.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the SSMKFD0319 fit my FN Mustang?
- It's listed to fit the Ford Mustang FN 5.0L V8 from 2018. Confirm your exact build and model year with the workshop before ordering.
- What does the bi-modal muffler do?
- It uses a valve that switches the exhaust between a quieter and a more open path, so the note can change depending on the valve state. The workshop can explain how it's controlled.
- Are the extractors coated?
- Yes — the extractors are HPC ceramic-coated, a heat-management finish on the tubular headers.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View part
Ford FG GT V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$6991.38Ford FG GT V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.