HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat
MPI AutomotiveRRP$6245.89HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat & Without Muffler (SKU: SSMKTY0336) Engineered.
View partSSMKTY0023
Toyota Landcruiser VDJ76 V8 Wagon 3 With Cat & Rear Hotdog
Toyota Landcruiser VDJ76 V8 Wagon 3 With Cat & Rear Hotdog.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $1973.18 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKTY0023
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Vehicle fitment
- Toyota
- Stock status
- In stock at supplier
The MPI Automotive SSMKTY0023 is listed to fit the Toyota Landcruiser VDJ76 V8 wagon and keeps the catalytic converter while running a rear hotdog. That with-cat build is the headline: it retains the factory emissions hardware and uses a compact straight-through resonator at the rear rather than a chambered muffler.
What's a hotdog, and why use one here?
A hotdog is a compact, straight-through resonator — a small canister that lets gas flow through with minimal restriction while taking the edge off resonance. On the VDJ76 V8 wagon it sits at the rear in place of a bulkier chambered muffler, which suits the under-body packaging of a wagon and gives a freer-flowing rear section. It's a less restrictive, harder-edged approach than a full absorptive muffler.
Does it keep the cat?
Yes — this is a with-cat build, so the catalytic converter stays in place. That leaves the emissions hardware the Landcruiser left the factory with intact, which is the sticking point for compliance on a road-driven V8. Confirm the exact build and any state requirements with the workshop before fitting.
Will it suit my VDJ76?
It's listed to fit the Toyota Landcruiser VDJ76 V8 five-door wagon. The 76 series came in a few specs over its run, so send your exact build to the workshop and we'll confirm the cat location, hanger points and rear routing before ordering. We treat the listing as a starting point and check the vehicle on the hoist.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits this system in-house across the Illawarra. We mount it on the hoist, line the run up against the factory cat and hangers, set the rear hotdog for clearance under the wagon body, and check there's no contact before sign-off. The SSMKTY0023 is held at its listed RRP as a special-order item; we'll confirm availability when you book.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the SSMKTY0023 keep the catalytic converter?
- Yes — it's a with-cat build, so the factory catalytic converter stays in place along with the emissions hardware.
- What's a hotdog and how does it differ from a muffler?
- A hotdog is a compact straight-through resonator — it flows freely and takes the edge off resonance, rather than quietening by chambering like a conventional muffler.
- Will it fit my Landcruiser?
- It's listed to fit the VDJ76 V8 wagon. Confirm your exact build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual
MPI AutomotiveRRP$6230.75Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat & Without Muffler.
View part
HFD-VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Pre DPF) 4in Dual
MPI AutomotiveRRP$6070.20HFD-VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Pre DPF) 4in Dual With Cat & No Muffler (SSMKTY0340).
View part
Landcruiser VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Without DPF) 4in
MPI AutomotiveRRP$6055.06Landcruiser VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Without DPF) 4in Dual With Cat & No Muffler.
View part
HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat
MPI AutomotiveRRP$5854.77HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat & Without Muffler.
View part
Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual
MPI AutomotiveRRP$5839.64Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat & Without Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.