HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat
MPI AutomotiveRRP$6245.89HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat & Without Muffler (SKU: SSMKTY0336) Engineered.
View partSSMKTY0065
Toyota Hilux N70 GGN 4.0L V6 2.5in Cat Back Exhaust, Centre Muffler, Rear Hotdog
Toyota Hilux N70 GGN 4.0L V6 2.5in Cat Back Exhaust, Centre Muffler, Rear Hotdog (SSMKTY0065) Fits TOYOTA.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $1372.62 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKTY0065
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Vehicle fitment
- Toyota
- Stock status
- In stock at supplier
The MPI Automotive SSMKTY0065 is a 2.5in cat-back with a centre muffler and a rear hotdog, listed to fit the Toyota Hilux N70 GGN 4.0L V6 petrol. The petrol V6 application and the muffler-plus-hotdog pairing set it apart — a balanced cat-back tuned for the V6 rather than a diesel build.
What does the centre-muffler, rear-hotdog pairing do?
This cat-back runs a centre muffler to chamber and absorb the bulk of the sound, then a rear hotdog — a straight-through resonator — to trim the remaining harshness while keeping flow up at the back. On the 4.0L petrol V6 that balance gives a cleaner note without the heavy quietening of a twin-muffler setup. It's a measured petrol cat-back rather than an open build.
Why a 2.5in cat-back on the GGN Hilux?
A cat-back replaces the exhaust from the catalytic converter back, leaving the cat and the rest of the emissions hardware in place. At 2.5in it's sized for the 4.0L petrol V6 — a sensible bore for that engine rather than an oversized diesel pipe. The centre muffler and rear hotdog are spaced through the run to manage note and drone.
Is it road legal?
As a cat-back, the SSMKTY0065 leaves the catalytic converter and the factory emissions hardware ahead of it in place. The supplier doesn't publish a separate cat in this section because it's a cat-back, so confirm your full setup and any state requirements with the workshop before fitting.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits cat-back systems like this in-house across the Illawarra. We check the 2.5in routing from the cat back, set the centre muffler, rear hotdog and hanger positions, and seal the joins. RRP is $1,372.62; bring the N70 in and we'll confirm the V6 fitment and how the result will sound before booking.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the SSMKTY0065 fit my petrol Hilux?
- It's listed to fit the Toyota Hilux N70 GGN 4.0L V6 petrol. Confirm your exact build with the workshop before ordering.
- What does cat-back mean?
- It replaces the exhaust from the catalytic converter back, so the cat and the emissions hardware ahead of it stay in place.
- What bore is it?
- It's a 2.5in cat-back as published by the supplier, sized for the 4.0L petrol V6.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual
MPI AutomotiveRRP$6230.75Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat & Without Muffler.
View part
HFD-VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Pre DPF) 4in Dual
MPI AutomotiveRRP$6070.20HFD-VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Pre DPF) 4in Dual With Cat & No Muffler (SSMKTY0340).
View part
Landcruiser VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Without DPF) 4in
MPI AutomotiveRRP$6055.06Landcruiser VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Without DPF) 4in Dual With Cat & No Muffler.
View part
HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat
MPI AutomotiveRRP$5854.77HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat & Without Muffler.
View part
Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual
MPI AutomotiveRRP$5839.64Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat & Without Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.