HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat
MPI AutomotiveRRP$6245.89HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat & Without Muffler (SKU: SSMKTY0336) Engineered.
View partSSMKTY0088
Toyota Landcruiser HZJ105 CT26 Turbo 3in Turbo Back with Muffler
Toyota Landcruiser HZJ105 CT26 Turbo 3in Turbo Back with Muffler.
BrandMantaMPI Automotive
Category: Mufflers and resonators
RRP $2230.15 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKTY0088
- Supplier
- MPI Automotive
- Category
- Mufflers and resonators
- Vehicle fitment
- Toyota
- Stock status
- In stock at supplier
The MPI Automotive SSMKTY0088 is a 3in turbo-back with a muffler, listed to fit the Toyota Landcruiser HZJ105 set up with a CT26 turbo. It's cut for the CT26 turbo conversion on the 105-Series rather than the factory naturally-aspirated 1HZ, with a muffler keeping the note settled.
What does "CT26 turbo" tell you about this part?
The HZJ105 left the factory naturally aspirated, so this system is built for the aftermarket CT26 turbo conversion — the run picks up at the turbo outlet rather than a stock manifold. That's the distinguishing point against an open or hotdog build: this is the muffled version for a CT26-converted 105, aimed at owners who want flow without a hard note. It only makes sense on a 105 already running that turbo.
Why a muffler on the converted 105-Series?
At 3in this is a larger-bore turbo-back sized for the turbocharged 1HZ, and finishing through a muffler chambers and absorbs enough sound to keep cabin drone down on the highway. It's the quieter route for the CT26 conversion compared with a hotdog-only build on the same truck.
Will it suit my HZJ105?
The SSMKTY0088 is listed to fit the Toyota Landcruiser HZJ105 with a CT26 turbo. Because it's tied to that conversion, confirm your turbo setup and routing with the workshop before ordering. Whether a catalytic converter forms part of this section isn't published by the supplier, so we'll confirm the emissions detail for your truck before fitting.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits turbo-back systems like this in-house across the Illawarra. We check the 3in routing from the turbo back, confirm it suits your CT26 install, set the muffler and hangers, and seal the joins. RRP is $2,230.15; bring the 105-Series in and we'll confirm the conversion details before booking.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the SSMKTY0088 suit a stock HZJ105?
- No — it's listed to suit a HZJ105 running a CT26 turbo, so the pipework is cut for that conversion rather than the factory naturally-aspirated setup.
- Is it loud?
- It runs a muffler, so it's the more subdued route for the CT26 conversion compared with a hotdog-only build.
- What bore is it?
- It's a 3in turbo-back as published by the supplier, sized for the turbocharged 1HZ.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual
MPI AutomotiveRRP$6230.75Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual With Cat & Without Muffler.
View part
HFD-VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Pre DPF) 4in Dual
MPI AutomotiveRRP$6070.20HFD-VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Pre DPF) 4in Dual With Cat & No Muffler (SSMKTY0340).
View part
Landcruiser VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Without DPF) 4in
MPI AutomotiveRRP$6055.06Landcruiser VDJ79 V8 4.5L TD, Dual Cab Ute 2012-2016, (Without DPF) 4in Dual With Cat & No Muffler.
View part
HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat
MPI AutomotiveRRP$5854.77HFD-VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat & Without Muffler.
View part
Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual
MPI AutomotiveRRP$5839.64Landcruiser VDJ79 V8 4.5L TD, (DPF) Ute 2016 To Current, 4in Dual Without Cat & Without Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.