SSMKTY0220

Landcruiser VDJ79 V8 4.5L TD, Ute 2016 To Current, 4in Dual DPF Back Without Muffler

Landcruiser VDJ79 V8 4.5L TD, Ute 2016 To Current, 4in Dual DPF Back Without Muffler (SKU: SSMKTY0220) Engineered.

BrandMantaMPI Automotive

Category: Mufflers and resonators

RRP $4624.18 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Landcruiser VDJ79 V8 4.5L TD, Ute 2016 To Current, 4in Dual DPF Back Without Muffler product image

Part specs

SKU
SSMKTY0220
Supplier
MPI Automotive
Category
Mufflers and resonators
Vehicle fitment
Toyota
Stock status
In stock at supplier

A 4in dual DPF-back run without a muffler, the MPI Automotive SSMKTY0220 picks up behind the diesel particulate filter and twins the pipework for an open rear. It's listed to fit the Toyota LandCruiser VDJ79 V8 4.5L turbo-diesel ute from 2016 onward.

What does a 4in dual DPF-back cover?

A DPF-back replaces the exhaust from behind the diesel particulate filter rearward, leaving the DPF and upstream emissions hardware untouched. The SSMKTY0220 runs a 4in dual layout — twinned pipework — and deletes the rear muffler, so it opens the note on the 79 Series' 4.5L V8 turbo-diesel without disturbing the particulate filter. The dual routing is what marks it out from a single-pipe section.

Why the dual, muffler-free build?

Twinning the pipework at 4in gives a larger combined path at the rear, and dropping the muffler keeps it open through that section. For a DPF-era 79 Series owner who wants the back half of the system breathing freely, that's the appeal — the DPF stays, but the rear runs vocal and twinned.

Is it road legal?

As a DPF-back, the SSMKTY0220 leaves the diesel particulate filter and upstream emissions equipment in place — it doesn't remove the DPF. Deleting the muffler changes the note, so confirm noise levels and any state requirements with the workshop before fitting.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men supplies and fits this MPI Automotive DPF-back in-house across the Illawarra. We confirm the connection behind the DPF, check hanger points on the 4in dual run and the listed 79 Series fitment, then book the bay. The RRP is $4,624.18.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the SSMKTY0220 remove the DPF?
No. It's a DPF-back, so it starts behind the diesel particulate filter and leaves the DPF and upstream emissions hardware in place.
What does the dual layout mean?
It runs a 4in dual — twinned pipework at the rear — for a larger combined path, with no muffler for a more open note.
Will it fit the DPF 79 Series?
It's listed to fit the LandCruiser VDJ79 V8 4.5L turbo-diesel ute from 2016 onward. Confirm your build with the workshop first.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.