Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partEMG164
Ford Falcon 6CYL Cast Iron X-Flow 3.3L, 4.1L Engine Manifold Gasket
MPI Automotive Ford Falcon 6CYL Cast Iron X-Flow 3.3L, 4.1L Engine Manifold Gasket.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $33.85 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- EMG164
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Stock status
- In stock at supplier
The MPI Automotive EMG164 is a manifold gasket listed to fit the Ford Falcon six-cylinder cast-iron crossflow (X-flow) 3.3-litre and 4.1-litre engine. It's the sealing gasket between the cylinder head and the exhaust manifold, not the manifold itself.
What does this gasket cover?
The EMG164 is the flat exhaust gasket for the cast-iron crossflow Falcon six in 3.3-litre and 4.1-litre form. It seals the joint where the manifold or extractor meets the cylinder head, keeping exhaust gas in the runner rather than leaking at the flange. It is matched to the crossflow head's port pattern, which is why it is listed against the 3.3 and 4.1 cast-iron X-flow specifically.
What is a manifold gasket and what does it do?
A manifold gasket is the replaceable seal between the cylinder head and the exhaust manifold or extractor. It is renewed whenever the manifold comes off — a head job, a leak, or an extractor upgrade — because the old gasket hardens with heat and won't reseal. On an in-line six the head runs a single exhaust face. A worn gasket ticks or hisses under load and can let fumes past. It does not change how the engine runs; its job is to keep the head-to-manifold joint gas-tight through the engine's heat cycles.
Will it suit my Falcon six?
The EMG164 is listed to fit the cast-iron crossflow Falcon six in 3.3-litre and 4.1-litre. The later alloy-head and EFI engines take different gaskets, so confirm your engine and head with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Falcon six manifolds and gaskets in-house across the Illawarra. The job means cleaning both faces, checking the long single flange is flat, and tightening evenly so the gasket seals without distortion. The EMG164 is supplied by MPI Automotive at an RRP of $33.85; contact us to confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the EMG164 fit?
- It's listed to fit the Ford Falcon cast-iron crossflow six in 3.3L and 4.1L. Confirm your head with the workshop first.
- Will it fit an alloy-head Falcon six?
- No — this is for the cast-iron crossflow head. The later alloy-head engines take a different gasket.
- Can you fit it?
- Yes. Oak Flats Muffler Men fits Falcon six gaskets and manifolds in the Illawarra; contact us to book.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.