Hyundai Tiburon V6 Extractors
MPI AutomotiveRRP$1331.53Hyundai Tiburon V6 Extractors (FX-411) fits selected vehicle applications. Fast shipping, warranty included.
View partEMG173
L200 & L300 SF SG SH 2.0L & 2.4L EFI SIRUS 4G62, 4G63, 4G64, Hyundai G4CS, Twin Siamese
L200 & L300 SF SG SH 2.0L & 2.4L EFI SIRUS 4G62, 4G63, 4G64, Hyundai G4CS, Twin Siamese Ports for selected vehicle applications.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $56.07 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- EMG173
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Stock status
- In stock at supplier
The MPI Automotive EMG173 is an extractor/manifold gasket cut for the twin siamese port head, listed to fit the L200 and L300 (SF/SG/SH) 2.0-litre and 2.4-litre EFI Sirius engines (4G62/4G63/4G64) and the Hyundai G4CS. It's the head-to-extractor seal, not the header.
Why does the twin siamese port matter here?
The Sirius engine family ran more than one exhaust port pattern, and the EMG173 is cut specifically for the twin siamese port head — that's the detail that sets it apart from gaskets cut for equal-spaced ports on the same engine codes. Match the port layout and the gasket seals cleanly; mismatch it and you get a leak path no amount of torque will close. The Hyundai G4CS shares the relevant geometry, which is why it's listed alongside.
What does an extractor gasket do?
It's the replaceable seal between the cylinder head and the extractor or manifold, renewed whenever that joint is opened — new extractors, a head off, or a leak — because heat cycling hardens the old material so it won't reseal. It doesn't alter how the engine runs; its only job is to keep the joint gas-tight through repeated heat cycles. On these EFI Sirius fours that means holding a clean seal across the 2.0-litre and 2.4-litre variants the gasket is listed against.
Will it suit my engine?
The EMG173 is listed to fit the L200 and L300 SF/SG/SH on the 2.0-litre and 2.4-litre EFI Sirius engines (4G62/4G63/4G64) and the Hyundai G4CS, with twin siamese ports. Other port layouts within the same engine family take a different gasket, so confirm your head with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these Sirius-engine manifolds and extractors in-house across the Illawarra. The job means cleaning both faces, confirming the siamese port layout matches the head in front of you, and tightening evenly so the gasket seals without distortion. The EMG173 is supplied by MPI Automotive at an RRP of $56.07; contact us to confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the EMG173 fit?
- It's listed for the L200/L300 SF/SG/SH 2.0L/2.4L EFI Sirius 4G62/4G63/4G64 and the Hyundai G4CS, twin siamese ports. Confirm your head with the workshop first.
- Why does the port layout matter?
- The Sirius family came with more than one port pattern; this gasket is cut for the twin siamese port, so matching it avoids a mismatched seal.
- Can you fit it?
- Yes. Oak Flats Muffler Men fits these gaskets and extractors in the Illawarra; contact us to book.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Hyundai Sonata 2.4L 4G64 1989 on Extractor
MPI AutomotiveRRP$776.68Hyundai Sonata 2.4L 4G64 1989 on Extractor for selected vehicle applications.
View part
HYUNDAI COUPE, LANTRA, 2.0LT 1996-2002, ELANTRA 1.8LT-2.0LT 2000-2004
MPI AutomotiveRRP$684.78HYUNDAI COUPE, LANTRA, 2.0LT 1996-2002, ELANTRA 1.8LT-2.0LT 2000-2004 for selected vehicle applications.
View part
Hyundai, Elantra 1.8L, 2.0L 16V DOHC Extractor
MPI AutomotiveRRP$517.63Hyundai, Elantra 1.8L, 2.0L 16V DOHC Extractor (SKU: FX-425) Engineered for selected vehicle applications.
View part
Redback Manifold Catalytic Converter for Hyundai Trajet
SWDRRP$809.00Redback Manifold Catalytic Converter.
View part
Redback Manifold Close Coupled Cat for Hyundai Elantra (09/2010 - on)
SWDRRP$685.00Redback Manifold Close Coupled Cat.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.