Hyundai Tiburon V6 Extractors
MPI AutomotiveRRP$1331.53Hyundai Tiburon V6 Extractors (FX-411) fits selected vehicle applications. Fast shipping, warranty included.
View partFX-415
HYUNDAI COUPE, LANTRA, 2.0LT 1996-2002, ELANTRA 1.8LT-2.0LT 2000-2004
HYUNDAI COUPE, LANTRA, 2.0LT 1996-2002, ELANTRA 1.8LT-2.0LT 2000-2004 for selected vehicle applications.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $684.78 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-415
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Stock status
- In stock at supplier
The MPI Automotive FX-415 is a head-end part from the extractors range, listed to fit the Hyundai Coupe and Lantra 2.0L (1996 to 2002) and the Elantra 1.8L and 2.0L (2000 to 2004). It's the part that takes the place of the factory exhaust manifold.
What is this part and where does it sit?
This is a head-end exhaust part from MPI's extractors range, made to replace the cast manifold that bolts to the cylinder head. A part of this type sits at the very front of the exhaust system, ahead of the pipework, cat and muffler, and feeds the rest of the system behind it. On these four-cylinder Hyundais it's matched to the engine and head listed. It's a head-end component only — the rest of the exhaust carries on behind it unchanged unless you're replacing that separately.
What does the FX-415 cover across these models?
The listing spans three closely related Hyundais: the Coupe and Lantra 2.0L from 1996 to 2002, and the Elantra 1.8L and 2.0L from 2000 to 2004. These shared platforms and engines across the period, which is why one part covers the range. The supplier hasn't published the construction specifics here — tube diameter, material and finish aren't stated — so we don't put numbers on it the record doesn't carry. We'd confirm those with MPI Automotive at order time.
Will it suit my car?
It's listed to fit the Coupe/Lantra 2.0L (1996–2002) and Elantra 1.8L/2.0L (2000–2004). With three models and a couple of engines in the mix, the safest check is to confirm your exact model, engine and year with us before ordering. Fitment is listed-to-fit, not guaranteed, because feed data can be imperfect and the actual car settles the head match.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Hyundai head-end parts in-house across the Illawarra. The job means unbolting the factory manifold from the head, sealing the new part with fresh gaskets and confirming it ties cleanly into the existing pipework. Tell us your exact model and engine and we'll verify the FX-415 before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which Hyundais does the FX-415 suit?
- It's listed for the Coupe and Lantra 2.0L (1996–2002) and the Elantra 1.8L and 2.0L (2000–2004). Confirm your exact model, engine and year with the workshop.
- Is this a complete exhaust?
- No. It's the head-end part that replaces the manifold. The pipework and muffler behind it are separate.
- What's published about the construction?
- The supplier hasn't published tube diameter or material in this listing. We can confirm those with MPI Automotive when you order through us.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Hyundai Sonata 2.4L 4G64 1989 on Extractor
MPI AutomotiveRRP$776.68Hyundai Sonata 2.4L 4G64 1989 on Extractor for selected vehicle applications.
View part
Hyundai, Elantra 1.8L, 2.0L 16V DOHC Extractor
MPI AutomotiveRRP$517.63Hyundai, Elantra 1.8L, 2.0L 16V DOHC Extractor (SKU: FX-425) Engineered for selected vehicle applications.
View part
L200 & L300 SF SG SH 2.0L & 2.4L EFI SIRUS 4G62, 4G63, 4G64, Hyundai
MPI AutomotiveRRP$56.07L200 & L300 SF SG SH 2.0L & 2.4L EFI SIRUS 4G62, 4G63, 4G64, Hyundai G4CS, Twin Siamese Ports for selected vehicle applications.
View part
Redback Manifold Catalytic Converter for Hyundai Trajet
SWDRRP$809.00Redback Manifold Catalytic Converter.
View part
Redback Manifold Close Coupled Cat for Hyundai Elantra (09/2010 - on)
SWDRRP$685.00Redback Manifold Close Coupled Cat.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.