Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006
MPI AutomotiveRRP$1752.34Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006 on - includes catalytic converters (SKU.
View partEMG194
Lancer, L300, Triton 2.0L, 2.4L SOHC 4G63, 4G64 Equal Spaced Oval Port
Lancer, L300, Triton 2.0L, 2.4L SOHC 4G63, 4G64 Equal Spaced Oval Port (EMG194) Fits a wide range
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $42.52 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- EMG194
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Stock status
- In stock at supplier
The MPI Automotive EMG194 is an extractor/manifold gasket listed to fit the Mitsubishi Triton (and L300/Lancer) 2.0-litre and 2.4-litre SOHC 4G63/4G64 engines with the equal-spaced oval port. It's the head-to-extractor seal, not the header itself.
What does this gasket cover?
The EMG194 is the flat exhaust gasket for the SOHC 4G63 and 4G64 fours used in the Triton, L300 and Lancer. It seals the joint where the extractor or factory manifold meets the cylinder head, keeping exhaust gas in the runner rather than leaking at the flange. This one is cut for the equal-spaced oval-port head, which is the detail that separates it from the other 4G63/4G64 port layouts.
What is an extractor gasket and what does it do?
An extractor gasket is the replaceable seal between the cylinder head and the extractor or manifold. It is renewed whenever that joint is opened — new extractors, a head off, or a leak — because heat cycling hardens the old material so it won't reseal. A worn gasket ticks or hisses under load and can let fumes past. The 4G-series ran with more than one port pattern, so matching the equal-spaced oval port matters. It does not change how the engine runs; its job is to keep the joint sealed through the engine's heat cycles.
Will it suit my Triton?
The EMG194 is listed to fit the 2.0-litre and 2.4-litre SOHC 4G63/4G64 with the equal-spaced oval port, across the Triton, L300 and Lancer. Other 4G port layouts take different gaskets, so confirm your head with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Triton extractors and gaskets in-house across the Illawarra. The job means cleaning both faces, confirming the port layout matches, and tightening evenly so the gasket seals without distortion. The EMG194 is supplied by MPI Automotive at an RRP of $42.52; contact us to confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the EMG194 fit?
- It's listed to fit the 2.0L/2.4L SOHC 4G63/4G64 equal-spaced oval-port head in the Triton, L300 and Lancer. Confirm your head with the workshop first.
- Why does the port layout matter?
- The 4G-series came with more than one port pattern; this gasket is cut for the equal-spaced oval port, so matching it avoids a mismatched seal.
- Can you fit it?
- Yes. Oak Flats Muffler Men fits Triton gaskets and extractors in the Illawarra; contact us to book.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004
MPI AutomotiveRRP$1525.22Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004 includes Y Pipe, Flex Extractor.
View part
Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY
MPI AutomotiveRRP$1459.21Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY Model Extractor.
View part
Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards
MPI AutomotiveRRP$1303.45Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards Extractor (FX-422) Fits MITSUBISHI.
View part
Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold
MPI AutomotiveRRP$1295.76Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold Replacement Includes Cat Direct Fit.
View part
Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat
MPI AutomotiveRRP$1105.08Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat on Passenger Side Extractor 6G74.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.